Cutmaster 52
-
- 1/2 Star Member
- Posts: 8
- Joined: Thu Mar 01, 2018 3:29 pm
Cutmaster 52
Will Thermal Dynamics 9-8210 (60 amp) tips work well with Cutmaster 52 and cnc plasma table ?
-
- 4 Star Elite Contributing Member
- Posts: 1961
- Joined: Fri Apr 17, 2009 11:48 am
Re: Cutmaster 52
Yes, they will fit and will cut material but the orifice size is larger than required for the Cutmaster 52 so your cut quality will not be as good but depending on what your doing that may not be of concern. If your doing fine artistic stuff then get the lower amp tips with the smaller orifice.