Hello
I have cnc plasma but I have a problem I cannot enter parameters without a password and I do not have a password
My command center is "START SHAPHON"
The machine receives the program, but it will not automatically start it and cannot be run automatically
Can anyone help me, i would appreciate it
pasword problem on chinese machine
-
- 1/2 Star Member
- Posts: 3
- Joined: Tue Jan 28, 2020 12:55 pm
-
- 4.5 Star Elite Contributing Member
- Posts: 2567
- Joined: Thu Jul 24, 2008 11:15 am
Re: pasword problem on chinese machine
I believe your problem was solved by another member here https://www.plasmaspider.com/viewtopic.php?f=3&t=29360