THC Suggestions?

For general topics and questions that do not fit into any of the other categories or forums.
Post Reply
Bishop
1/2 Star Member
1/2 Star Member
Posts: 5
Joined: Thu Jun 16, 2022 3:26 pm

THC Suggestions?

Post by Bishop »

Hello,
I am looking to add a THC to my plasma table. I will be using it with mach3 are there any suggestions on brand? so far its a toss up between the Proma THC and the CNC4PC THC.

I would love to hear any suggestions you guys would have.

Thanks!
User avatar
acourtjester
6 Star Elite Contributing Member
6 Star Elite Contributing Member
Posts: 7770
Joined: Sat Jun 02, 2012 6:04 pm
Location: Pensacola, Fla

Re: THC Suggestions?

Post by acourtjester »

You can use the search function in the upper right for a look at reports of THC units. I would not use the Proma SD unit as members have had problems with that unit. I had used the Proma 150 that worked but was not reliable for long life.
DIY 4X4 Plasma/Router Table
Hypertherm PM65 Machine Torch
Drag Knife and Scribe
Miller Mig welder
13" metal lathe
Small Mill
Everlast PowerTig 255 EXT
adbuch
6 Star Elite Contributing Member
6 Star Elite Contributing Member
Posts: 8602
Joined: Thu Sep 21, 2017 5:22 pm
Location: Tucson, Arizona
Contact:

Re: THC Suggestions?

Post by adbuch »

acourtjester wrote: Mon Jun 27, 2022 8:50 am You can use the search function in the upper right for a look at reports of THC units. I would not use the Proma SD unit as members have had problems with that unit. I had used the Proma 150 that worked but was not reliable for long life.
:Like :Like :Like
To new in AZ, I will look forward to seeing (or hearing) how you make out.
David
Post Reply

Return to “CNC Plasma Cutters General Forum”