Troubleshooting uneven hexagon

Cut quality issues can be discussed here, most common issues have been discussed here and should help you.
Post Reply
DIYPlasmatable
1 Star Member
1 Star Member
Posts: 14
Joined: Tue Jan 31, 2023 7:06 pm

Troubleshooting uneven hexagon

Post by DIYPlasmatable »

So iv been cutting on my DIY plasma table for 3-4 months with hexagons having all sharp corners, after loading the same file today i noticed halfway threw the cut (25 Hexagon cuts) that they were all like the photo provided... checked axis squareness, all good! changed consumables x2 still the same... not sure what it could be as it was working perfect yesterday... ill includes my table specs and just wondering if anyone else has ever seen this before and have a idea! thanks in advance!

4x8 Plasma table
Primeweld cut60 - 35amps - 75PSI
Belt Driven X and Y Axis, Tensioned and tight
MACH3 Control
C94 CNC4PC Board-UC300 Eth

16 gauge metal
2100 MM/Min
thumbnail_image0.jpg
thumbnail_image0 (1).jpg
plasmanewbie
4.5 Star Elite Contributing Member
4.5 Star Elite Contributing Member
Posts: 2567
Joined: Thu Jul 24, 2008 11:15 am

Re: Troubleshooting uneven hexagon

Post by plasmanewbie »

Another similar issue from yesterday that may be of some help here viewtopic.php?f=4&t=35056
DIYPlasmatable
1 Star Member
1 Star Member
Posts: 14
Joined: Tue Jan 31, 2023 7:06 pm

Re: Troubleshooting uneven hexagon

Post by DIYPlasmatable »

plasmanewbie wrote: Wed Feb 01, 2023 3:02 pm Another similar issue from yesterday that may be of some help here viewtopic.php?f=4&t=35056
i actually seen that post just after making my post lol, should of browsed first thanks abunch tho appreciate it!
plasmanewbie
4.5 Star Elite Contributing Member
4.5 Star Elite Contributing Member
Posts: 2567
Joined: Thu Jul 24, 2008 11:15 am

Re: Troubleshooting uneven hexagon

Post by plasmanewbie »

Hey no problem and post back if you figure it out :Like
DIYPlasmatable
1 Star Member
1 Star Member
Posts: 14
Joined: Tue Jan 31, 2023 7:06 pm

Re: Troubleshooting uneven hexagon

Post by DIYPlasmatable »

plasmanewbie wrote: Fri Feb 03, 2023 11:15 am Hey no problem and post back if you figure it out :Like
It helped out alot with my uneven hexagon now just trying to figure out a new issue...

viewtopic.php?f=3&t=35076
Post Reply

Return to “Plasma Cut Quality Forum”