Cleaning up stainless and aluminum cut edges

Cut quality issues can be discussed here, most common issues have been discussed here and should help you.
Post Reply
motoguy
4 Star Elite Contributing Member
4 Star Elite Contributing Member
Posts: 1184
Joined: Tue Aug 25, 2015 12:05 pm
Location: Central MO, USA

Cleaning up stainless and aluminum cut edges

Post by motoguy »

I'd like to start working more with stainless and aluminum. However...those edges! What are your tricks for cleaning up the rough edges on aluminum, and the rough/blackened edges on stainless? Flap wheel on large flat areas, die grinder, small wheel, and go to town on small or interior cuts?
Last edited by motoguy on Thu Mar 23, 2017 7:18 pm, edited 2 times in total.
Bulltear 6x12 w/ Proton Z axis & watertable
CommandCNC/Linux w/ Ohmic & HyT options
Hypertherm Powermax 85 w/ machine torch
Solidworks, Coreldraw X7, Inkscape, Sheetcam
sphurley
3 Star Elite Contributing Member
3 Star Elite Contributing Member
Posts: 445
Joined: Sat Jul 04, 2015 10:43 pm

Re: Cleaning up stainless and aluminum cut edges

Post by sphurley »

I spray mig shield on both sides of the stainless before I cut. It helps but not perfect. Since my parts are not display pieces, we flap the sides and then into the vibrator for a uniform flat finish and burr free.
Steve
Platform CNC Plasma table
CandCNC Ethercut IV DTHC
Hypertherm 85/CPC/RS485
Miller 350P
Miller Dynasty 280DX
plain ol Bill
3.5 Star Elite Contributing Member
3.5 Star Elite Contributing Member
Posts: 689
Joined: Fri Aug 15, 2008 6:22 pm
Location: Tenino,WA

Re: Cleaning up stainless and aluminum cut edges

Post by plain ol Bill »

I'm sure you know this already but DO NOT use wire wheels, flappers or grinding disc's that have been used on carbon steel on stainless unless you want rust spots.
plain ol Bill
Hypertherm 1250
Duramax machine torch
Corel Draw X6
Sheetcam
Mach3
5 x 10 self built table
Lots of ineptitude
User avatar
SeanP
4 Star Member
4 Star Member
Posts: 950
Joined: Thu Aug 01, 2013 11:50 am
Location: Co Kerry, Ireland

Re: Cleaning up stainless and aluminum cut edges

Post by SeanP »

What I do is try to avoid those jobs, especially if a decent finish is needed, it's bad enough on straight edges, text & cutouts takes a lot of time.
I cleaned up some small parts yesterday using a adapter for the grinder to use those small 2'' discs, they worked well, used die grinder with small bits for internals, but a slow job.
Powermax XP45
Home built table, Candcnc DTHC 2, Dragoncut 620-4
R-Tech 210 Tig, Jasic 250 mig
Sheetcam, Scanything, Coreldraw
Table build gallery
muzza
4 Star Member
4 Star Member
Posts: 1472
Joined: Wed Feb 04, 2009 5:35 pm

Re: Cleaning up stainless and aluminum cut edges

Post by muzza »

I have a Rosco to clean up our stainless stuff, aluminium comes up pretty good straight off the table, just some small bits of dross on the back where the slats are which mostly come off when the job is pressure cleaned.

Oh, what's a Rosco you ask. Well Rosco is one of the guys in the shop who loves sitting there with stainless and Roloc discs on the mini grinder, a die grinder and emery paper to clean up all the inside cuts. He does a pretty good job of it too but if anyone wants full polish I send them to a metal polisher nearby.
Murray
RAD
2 Star Member
2 Star Member
Posts: 81
Joined: Fri Aug 28, 2015 3:17 pm

Re: Cleaning up stainless and aluminum cut edges

Post by RAD »

IMG-20170310-WA0001.jpg
20170326_074441.jpg
20170326_074314.jpg
Cut some oval flanges recently, close up on the edges of the wastage. I think these came out better than I expected.

This was customer supplied material so not sure if this was 304 or 316. What grade were you guys cutting that had rough blackened edges?
D.I.Y 4x4 CNC Plasma Table with water tray
60 Gal. A/C + D.I.Y Aftercooler + Water/Oil seperator + Desicant air dryer
45XP (CPC with hand torch)
MiniTHC
UCCNC + Sheetcam + Inkscape / AutoCAD
KIDTech
3 Star Member
3 Star Member
Posts: 359
Joined: Tue Oct 28, 2014 1:21 pm

Re: Cleaning up stainless and aluminum cut edges

Post by KIDTech »

Build ya a parts tumbler or get yourself a concrete mixer, either way is a good way of going about it. Then get ahold of me as I have 50-60 tons of ceramic for your media that works great on SS.
DIY 5x10 v rail, rack and pinion
Gecko g540
Pm65 - aka game changer
Longevity ForceCut 42i is sitting on the shelf
Proma THC
ACAD, SheetCam, Mach3
Millermatic 211
NEW HORSE IN THE STABLE:
4'x8' LDR downdraft w/a scribe
Milltronics Partner 2 CNC mill
motoguy
4 Star Elite Contributing Member
4 Star Elite Contributing Member
Posts: 1184
Joined: Tue Aug 25, 2015 12:05 pm
Location: Central MO, USA

Re: Cleaning up stainless and aluminum cut edges

Post by motoguy »

I bought a concrete mixer just for tumbling. Worked great on steel parts. Can I just rinse it out, or do I need a tumbler just for stainless work?
Bulltear 6x12 w/ Proton Z axis & watertable
CommandCNC/Linux w/ Ohmic & HyT options
Hypertherm Powermax 85 w/ machine torch
Solidworks, Coreldraw X7, Inkscape, Sheetcam
User avatar
Gamelord
4.5 Star Member
4.5 Star Member
Posts: 1637
Joined: Wed Aug 29, 2012 5:17 pm
Contact:

Re: Cleaning up stainless and aluminum cut edges

Post by Gamelord »

Never had a tumbler work that well on Stainless...but mine was quite small. Steel was no problem but stainless just seemed to roll around a bit and have zero effect. Tried several different media as well.

Would like more info on this though, cleaning stainless does take a while, especially raw stainless with lots of mill scale on it.
Once you take flight, your eyes will forever be turned to the sky." "Lack of appreciation is the worlds biggest crime."

Torchmate 6x14 w/THC Downdraft
Thermal Dynamics Cutmaster 101
Corel Draw / Adobe Illustrator
Torchmate CAD
KIDTech
3 Star Member
3 Star Member
Posts: 359
Joined: Tue Oct 28, 2014 1:21 pm

Re: Cleaning up stainless and aluminum cut edges

Post by KIDTech »

I worked on a project implementing RTO's (Regenerative Thermal Oxidizers) and they use a ceramic saddle for the media bed. We ordered too much and I got to keep the leftover which turn out to work great for SS tumbling but I do not rinse it out when changing metals....
DIY 5x10 v rail, rack and pinion
Gecko g540
Pm65 - aka game changer
Longevity ForceCut 42i is sitting on the shelf
Proma THC
ACAD, SheetCam, Mach3
Millermatic 211
NEW HORSE IN THE STABLE:
4'x8' LDR downdraft w/a scribe
Milltronics Partner 2 CNC mill
flimmy
2 Star Member
2 Star Member
Posts: 67
Joined: Sat Feb 21, 2015 5:18 pm
Location: Mt. Pleasant

Re: Cleaning up stainless and aluminum cut edges

Post by flimmy »

KIDTech wrote:Build ya a parts tumbler or get yourself a concrete mixer, either way is a good way of going about it. Then get ahold of me as I have 50-60 tons of ceramic for your media that works great on SS.
Where do you live ? I'd take some if you are close. I already have the concrete mixer for a tumbler just havent used it yet
KIDTech
3 Star Member
3 Star Member
Posts: 359
Joined: Tue Oct 28, 2014 1:21 pm

Re: Cleaning up stainless and aluminum cut edges

Post by KIDTech »

Indiana
DIY 5x10 v rail, rack and pinion
Gecko g540
Pm65 - aka game changer
Longevity ForceCut 42i is sitting on the shelf
Proma THC
ACAD, SheetCam, Mach3
Millermatic 211
NEW HORSE IN THE STABLE:
4'x8' LDR downdraft w/a scribe
Milltronics Partner 2 CNC mill
Shardha579
1/2 Star Member
1/2 Star Member
Posts: 1
Joined: Tue May 21, 2019 7:23 am

Re: Cleaning up stainless and aluminum cut edges

Post by Shardha579 »

Quite an interesting post.

Cleaning services in Pune 
Post Reply

Return to “Plasma Cut Quality Forum”