Auto fusion 360 constraint countour linking error help

General software related questions should be posted here.
Post Reply
Pigeonforgeutvrentals
1/2 Star Member
1/2 Star Member
Posts: 4
Joined: Sat Apr 06, 2019 1:19 pm

Auto fusion 360 constraint countour linking error help

Post by Pigeonforgeutvrentals »

I recently got the crossfire CNC table. I love it. Anyone having trouble doing inside and outside constraints or countours in auto fusion 360. Even zooming in they only are sometimes able to put the arrows inside or outside. Seems to be fine lines thanks for anyone’s help. It will omit the fine lines and give me a warning saying linking error and won’t draw those lines
User avatar
acourtjester
6 Star Elite Contributing Member
6 Star Elite Contributing Member
Posts: 7770
Joined: Sat Jun 02, 2012 6:04 pm
Location: Pensacola, Fla

Re: Auto fusion 360 constraint countour linking error help

Post by acourtjester »

You may be having a problem if the lines are not closed, with SheetCam you get an error, but you can use the "cut on the line" for open lines. Don't know if its the same with Fusion 360. Again with SheetCam I can check for open lines by trying to move the start point, open lines you cannot move the start from one end of the other. Close line you can move the start anywhere along a closed line.
DIY 4X4 Plasma/Router Table
Hypertherm PM65 Machine Torch
Drag Knife and Scribe
Miller Mig welder
13" metal lathe
Small Mill
Everlast PowerTig 255 EXT
plasmanewbie
4.5 Star Elite Contributing Member
4.5 Star Elite Contributing Member
Posts: 2567
Joined: Thu Jul 24, 2008 11:15 am

Re: Auto fusion 360 constraint countour linking error help

Post by plasmanewbie »

I have found that things like that happen when I am not clicking in the correct location to achieve what I want. I would help if you would upload the file.
Pigeonforgeutvrentals
1/2 Star Member
1/2 Star Member
Posts: 4
Joined: Sat Apr 06, 2019 1:19 pm

Re: Auto fusion 360 constraint countour linking error help

Post by Pigeonforgeutvrentals »

I have a crossfire did you figure out the inside and outside constraints
Post Reply

Return to “General Discussion”