plasma cam 3.11 software

Plasmacam software related questions and tips can be posted here
User avatar
Joe Jones
5 Star Elite Contributing Member
5 Star Elite Contributing Member
Posts: 3041
Joined: Sat Oct 11, 2014 2:33 pm
Location: Franklin, KY., USA
Contact:

Re: plasma cam 3.11 software

Post by Joe Jones »

cjmcclure wrote: Mon Mar 21, 2022 12:35 am Can anybody email me the 3.11 software. Bought used unit withought it my mistake.
As you FIRST post?

Joe



.
Franklin, KY., USA
Samson 510 & 4x4
6” Z Rail Lift Kit for PlasmaCam
CreatBot D600 PRO 3D Printer
12 Lasers
FREE DesignEdge Training!

It is more fun when it isn't necessary!
adbuch
6 Star Elite Contributing Member
6 Star Elite Contributing Member
Posts: 8599
Joined: Thu Sep 21, 2017 5:22 pm
Location: Tucson, Arizona
Contact:

Re: plasma cam 3.11 software

Post by adbuch »

cjmcclure wrote: Mon Mar 21, 2022 12:35 am Can anybody email me the 3.11 software. Bought used unit withought it my mistake.
Welcome to the forum!! Another great resource would be several of the Plasmacam Facebook groups.
In particular, you might consider joining those linked to below. There are still many 3.11 users participating in these groups and I think the chances are good that you may find the software you are looking for. Thanks for asking.

David

https://www.facebook.com/groups/PlasmaCAM.Tips

https://www.facebook.com/groups/1124877 ... ONOLOGICAL
User avatar
djreiswig
4.5 Star Elite Contributing Member
4.5 Star Elite Contributing Member
Posts: 1929
Joined: Thu Nov 19, 2015 10:02 pm
Location: SE Nebraska

Re: plasma cam 3.11 software

Post by djreiswig »

Joe Jones wrote: Mon Mar 21, 2022 4:42 pm
cjmcclure wrote: Mon Mar 21, 2022 12:35 am Can anybody email me the 3.11 software. Bought used unit withought it my mistake.
As you FIRST post?

Joe



.
I don't think his table will run without the software, so I don't think he will be asking for cutting help, or drawing help at this point.
I guess he could have posted a hello in the introduce yourself section. :roll:
Sorry, no help on the plasmacam software.
2014 Bulltear (StarLab) 4x8
C&CNC EtherCut
Mach3, SheetCam, Draftsight
Hypertherm PM65
Oxy/Acetylene Flame Torch
Pneumatic Plate Marker, Ohmic, 10 inch Rotary Chuck (in progress)
adbuch
6 Star Elite Contributing Member
6 Star Elite Contributing Member
Posts: 8599
Joined: Thu Sep 21, 2017 5:22 pm
Location: Tucson, Arizona
Contact:

Re: plasma cam 3.11 software

Post by adbuch »

djreiswig wrote: Mon Mar 21, 2022 8:00 pm

I don't think his table will run without the software, so I don't think he will be asking for cutting help, or drawing help at this point.
I guess he could have posted a hello in the introduce yourself section. :roll:
Sorry, no help on the plasmacam software.
Right you are! Some folks need to quit being so critical at every opportunity presented, and try to keep a more positive attitude. These are the sort of "snarky" remarks that are best kept to oneself.
David
User avatar
Joe Jones
5 Star Elite Contributing Member
5 Star Elite Contributing Member
Posts: 3041
Joined: Sat Oct 11, 2014 2:33 pm
Location: Franklin, KY., USA
Contact:

Re: plasma cam 3.11 software

Post by Joe Jones »

adbuch wrote: Mon Mar 21, 2022 8:15 pm
Right you are! Some folks need to quit being so critical at every opportunity presented, and try to keep a more positive attitude. These are the sort of "snarky" remarks that are best kept to oneself.
David
You don't understand PlasmaCam.

Joe



.
Franklin, KY., USA
Samson 510 & 4x4
6” Z Rail Lift Kit for PlasmaCam
CreatBot D600 PRO 3D Printer
12 Lasers
FREE DesignEdge Training!

It is more fun when it isn't necessary!
User avatar
Joe Jones
5 Star Elite Contributing Member
5 Star Elite Contributing Member
Posts: 3041
Joined: Sat Oct 11, 2014 2:33 pm
Location: Franklin, KY., USA
Contact:

Re: plasma cam 3.11 software

Post by Joe Jones »

cjmcclure wrote: Mon Mar 21, 2022 12:35 am Can anybody email me the 3.11 software. Bought used unit [without] it my mistake.
Welcome to PlasmaSpider, cjmcclure!

Can you give us some details about this purchase?

Why did you buy an old PlasmaCam table?

Where did you get it?

Was this an eBay purchase, or Craigslist, or storage locker sale, or auction, or inheritance, or ???

What model is it? The DHC? DHC2? Samson 510? GoTorch?

What did you pay for it?

Was it shipped to you, or did you go pick it up somewhere?

Did you transfer it into your name with PlasmaCam?

Are you NEW to PlasmaCam tables?

Are you NEW to CNC plasma cutting in general?

Do you already have a plasma cutter, or did the table come with one?

Tell me about your compressor, you know ... single or double stage, tank size, etc.

Is this a home hobby table, or do you have a welding or fab shop?

Is this a "barely used" table, or has it seen a lot of cutting?

Can you post some photos of your table so we can see the details?

If you locate a copy of 3.11, do you already know how to use it, or will you require training?

Where are you located? Are you near Kentucky? Are you in the USA? :roll:

What do you plan to do with the table once it is up and running?

How did you find PlasmaSpider?

Are you a male or a female?

What age range?

Is this table strictly for you, or is a wife/son/daughter/father/brother/uncle/cousin/grandparent/niece or nephew also part of the adventure?

Enquiring Minds Want to Know!

Today is March 21, 2022 I eagerly await your reply!

Snarky responses are optional :HaHa

Joe



.
Last edited by Joe Jones on Wed Mar 23, 2022 10:39 am, edited 1 time in total.
Franklin, KY., USA
Samson 510 & 4x4
6” Z Rail Lift Kit for PlasmaCam
CreatBot D600 PRO 3D Printer
12 Lasers
FREE DesignEdge Training!

It is more fun when it isn't necessary!
User avatar
Joe Jones
5 Star Elite Contributing Member
5 Star Elite Contributing Member
Posts: 3041
Joined: Sat Oct 11, 2014 2:33 pm
Location: Franklin, KY., USA
Contact:

Re: plasma cam 3.11 software

Post by Joe Jones »

:roll: <crickets>

Joe



.
Franklin, KY., USA
Samson 510 & 4x4
6” Z Rail Lift Kit for PlasmaCam
CreatBot D600 PRO 3D Printer
12 Lasers
FREE DesignEdge Training!

It is more fun when it isn't necessary!
User avatar
Joe Jones
5 Star Elite Contributing Member
5 Star Elite Contributing Member
Posts: 3041
Joined: Sat Oct 11, 2014 2:33 pm
Location: Franklin, KY., USA
Contact:

Re: plasma cam 3.11 software

Post by Joe Jones »

.


Hey, cjmcclure!

I know you're a busy guy and all. I am curious how goes the hunt for 3.11? :roll:

If you live close to me, I might be able to head out your way to help you get started with your table, once you pick up a copy.

Today is March 23, 2022 I eagerly await your reply!

Joe



.
Franklin, KY., USA
Samson 510 & 4x4
6” Z Rail Lift Kit for PlasmaCam
CreatBot D600 PRO 3D Printer
12 Lasers
FREE DesignEdge Training!

It is more fun when it isn't necessary!
User avatar
Joe Jones
5 Star Elite Contributing Member
5 Star Elite Contributing Member
Posts: 3041
Joined: Sat Oct 11, 2014 2:33 pm
Location: Franklin, KY., USA
Contact:

Re: plasma cam 3.11 software

Post by Joe Jones »

.
3/28/2022

<crickets>

Joe



.
Franklin, KY., USA
Samson 510 & 4x4
6” Z Rail Lift Kit for PlasmaCam
CreatBot D600 PRO 3D Printer
12 Lasers
FREE DesignEdge Training!

It is more fun when it isn't necessary!
User avatar
Joe Jones
5 Star Elite Contributing Member
5 Star Elite Contributing Member
Posts: 3041
Joined: Sat Oct 11, 2014 2:33 pm
Location: Franklin, KY., USA
Contact:

Re: plasma cam 3.11 software

Post by Joe Jones »

frfmetal.com wrote: Thu Feb 25, 2021 11:20 pm Can anyone please email me a copy of the 3.11 software. My computer stopped working and the original owner did not have the download disk
Another one ... :-| First post, asking for a copy of 3.11.

Joe



.
Franklin, KY., USA
Samson 510 & 4x4
6” Z Rail Lift Kit for PlasmaCam
CreatBot D600 PRO 3D Printer
12 Lasers
FREE DesignEdge Training!

It is more fun when it isn't necessary!
User avatar
Joe Jones
5 Star Elite Contributing Member
5 Star Elite Contributing Member
Posts: 3041
Joined: Sat Oct 11, 2014 2:33 pm
Location: Franklin, KY., USA
Contact:

Re: plasma cam 3.11 software

Post by Joe Jones »

eagle6052 wrote: Mon May 24, 2021 4:52 am Whats happening I have had no further contact from you.

Program 3.11 has been uploaded at your request for several days now.
Do you know WHY mousetraps work? It is because the mice do not understand WHY the cheese is FREE.

Joe


.
Franklin, KY., USA
Samson 510 & 4x4
6” Z Rail Lift Kit for PlasmaCam
CreatBot D600 PRO 3D Printer
12 Lasers
FREE DesignEdge Training!

It is more fun when it isn't necessary!
adbuch
6 Star Elite Contributing Member
6 Star Elite Contributing Member
Posts: 8599
Joined: Thu Sep 21, 2017 5:22 pm
Location: Tucson, Arizona
Contact:

Re: plasma cam 3.11 software

Post by adbuch »

...........................
User avatar
1MORECUT
2.5 Star Elite Contributing Member
2.5 Star Elite Contributing Member
Posts: 168
Joined: Wed Mar 31, 2010 6:58 pm

Re: plasma cam 3.11 software

Post by 1MORECUT »

David, when did you get a table with 3.11 software?
adbuch
6 Star Elite Contributing Member
6 Star Elite Contributing Member
Posts: 8599
Joined: Thu Sep 21, 2017 5:22 pm
Location: Tucson, Arizona
Contact:

Re: plasma cam 3.11 software

Post by adbuch »

1MORECUT wrote: Tue Jun 13, 2023 11:36 am David, when did you get a table with 3.11 software?
1MORECUT wrote: Tue Jun 13, 2023 11:58 am David, when did you get a table with 3.11 software?
adbuch wrote: Mon Jan 16, 2023 5:13 am Oscar - I use Design Edge, which is different than 3.11 - but I do the same thing for auto calibration. This is what my settings page for height control looks like.
John - I don't have a table with 3.11 software. Perhaps you mis-read my post.

David
User avatar
1MORECUT
2.5 Star Elite Contributing Member
2.5 Star Elite Contributing Member
Posts: 168
Joined: Wed Mar 31, 2010 6:58 pm

Re: plasma cam 3.11 software

Post by 1MORECUT »

To have the 3.11 software you need a table that runs 3.11. you are not to have the software.
adbuch
6 Star Elite Contributing Member
6 Star Elite Contributing Member
Posts: 8599
Joined: Thu Sep 21, 2017 5:22 pm
Location: Tucson, Arizona
Contact:

Re: plasma cam 3.11 software

Post by adbuch »

1MORECUT wrote: Tue Jun 13, 2023 8:21 pm To have the 3.11 software you need a table that runs 3.11. you are not to have the software.
John Derby - I don't have 3.11 software, and never have. I have the screen shots on file saved from images posted by a 3.11 user several years ago. I don't remember now where I got them - maybe the Plasmacam Owner's Community forum. I'd have to go back and check my Windows 7 computer where I originally downloaded them. I keep them on file just for reference material. Thanks for asking.
David
Last edited by adbuch on Wed Jun 14, 2023 1:55 am, edited 1 time in total.
adbuch
6 Star Elite Contributing Member
6 Star Elite Contributing Member
Posts: 8599
Joined: Thu Sep 21, 2017 5:22 pm
Location: Tucson, Arizona
Contact:

Re: plasma cam 3.11 software

Post by adbuch »

3.11.jpg
3.11.jpg (117.77 KiB) Viewed 3152 times
3.11 1.jpg
adbuch
6 Star Elite Contributing Member
6 Star Elite Contributing Member
Posts: 8599
Joined: Thu Sep 21, 2017 5:22 pm
Location: Tucson, Arizona
Contact:

Re: plasma cam 3.11 software

Post by adbuch »

1MORECUT wrote: Tue Jun 13, 2023 8:21 pm To have the 3.11 software you need a table that runs 3.11. you are not to have the software.
3.11.jpg
User avatar
1MORECUT
2.5 Star Elite Contributing Member
2.5 Star Elite Contributing Member
Posts: 168
Joined: Wed Mar 31, 2010 6:58 pm

Re: plasma cam 3.11 software

Post by 1MORECUT »

I know someone who post pictures of software and plasmacam went after them . I just making sure you do not have the software.
you need to think about posting software you do not have. I did find where you down loaded the pictures the date is May 30,2020.
adbuch
6 Star Elite Contributing Member
6 Star Elite Contributing Member
Posts: 8599
Joined: Thu Sep 21, 2017 5:22 pm
Location: Tucson, Arizona
Contact:

Re: plasma cam 3.11 software

Post by adbuch »

1MORECUT wrote: Sun Jun 18, 2023 3:59 pm I know someone who post pictures of software and plasmacam went after them . I just making sure you do not have the software.
you need to think about posting software you do not have. I did find where you down loaded the pictures the date is May 30,2020.
John - glad to hear you're staying on top of it and helping to police the Plasmacam users. Yes - we don't want anyone having and illegal copy of the 3.11 software. Keep up the good work!

David
Post Reply

Return to “Plasmacam - DesignEdge”