Can I use a different operating system on Plasmacam for a laser?

Plasmacam software related questions and tips can be posted here
Post Reply
sgauze
1/2 Star Member
1/2 Star Member
Posts: 1
Joined: Tue Sep 29, 2015 1:25 am

Can I use a different operating system on Plasmacam for a laser?

Post by sgauze »

Can I use a different operating system on Plasmacam for a laser?
Thank you
adbuch
6 Star Elite Contributing Member
6 Star Elite Contributing Member
Posts: 8599
Joined: Thu Sep 21, 2017 5:22 pm
Location: Tucson, Arizona
Contact:

Re: Can I use a different operating system on Plasmacam for a laser?

Post by adbuch »

Plasmacam 3.11 and Design Edge both run on Windows and interface to the Plasmacam controller. Are you asking if it is possible to use a different controller/software package to run a Plasmacam table to control a laser?
David
adbuch
6 Star Elite Contributing Member
6 Star Elite Contributing Member
Posts: 8599
Joined: Thu Sep 21, 2017 5:22 pm
Location: Tucson, Arizona
Contact:

Re: Can I use a different operating system on Plasmacam for a laser?

Post by adbuch »

Robert Johnson answered your question on the Plasmacam Facebook group.
David

https://www.facebook.com/groups/PlasmaCAM.Tips
Laser with Plasmacam question.jpg
Post Reply

Return to “Plasmacam - DesignEdge”