Circle problems

Mach 3 CNC from Artsoft questions or tips can be posted to this forum.
beefy
Posts: 1370
Joined: Fri Jan 18, 2013 3:19 am

Re: Circle problems

Post by beefy » Sat Aug 24, 2019 7:20 am

Leeroy6392 wrote:
Thu Aug 22, 2019 8:10 pm
The tap file I use to load into Mach 3 would not upload so I’m back out in my shop trying some different stuff.
On which Mach3 version where would I find that?
Doesn't matter then. If you can't upload any files then can't help. Was going to load a copy of your profile on the same version of Mach and test with your file, but guess that's not possible now, seeing as you won't be able to upload your profile too.

Good luck with the troubleshooting.
8 x 5 water table
Powermax 1250 with Duramax torch
UCCNC controller, UC400-ETH & UC300-ETH motion controllers.
Sheetcam
Geomagic Design 3D solid modelling
Coreldraw X5

User avatar
lockeyone
Elite Contributing Member
Elite Contributing Member
Posts: 74
Joined: Tue Nov 22, 2016 8:59 pm
Location: Schofield, WI USA

Re: Circle problems

Post by lockeyone » Sat Aug 24, 2019 9:38 am

Change your file.tap to file.old or .txt or something like that and see if you can upload it. Just explain you did that so the person helping can change it back to tap file. Just a thought.
Last edited by lockeyone on Sat Aug 24, 2019 5:36 pm, edited 1 time in total.
Table 4'x4', BladeRunner EtherCut 620 LINUX w/CommandCNC
Hypertherm 65 CPC/RS485 Machine torch 2016
BobCad router 50"x50" MACH3 2kw spindle 2003
Shoptask Eldorado cnc MACH3, 1999
Epilog Mini 24 60watt, 2013
Vectric Aspire CoralDraw x6 SheetCam

ctgolfer1
Posts: 26
Joined: Thu May 30, 2019 4:35 pm

Re: Circle problems

Post by ctgolfer1 » Sat Aug 24, 2019 12:33 pm

Interesting thread, Good Luck Leeroy!
I have nothing to add.
Nice to see all the good folks trying to help.

Staying tuned for the outcome.

User avatar
acourtjester
Elite Contributing Member
Elite Contributing Member
Posts: 3793
Joined: Sat Jun 02, 2012 6:04 pm
Location: Pensacola, Fla

Re: Circle problems

Post by acourtjester » Sat Aug 24, 2019 2:55 pm

There is a great way to transfer files of any size by using the Google drive, it is free for up to 15 Gigs of storage. You upload what you want and then send a link to a persons email address and they can download from the Google drive. Only drawback is you cannot use a Yahoo email they don't play nice with Google. I have used this to send videos and doc to anywhere. :Yay here are the instruction for downloading a folder of file or video.
Google drive download.doc

You do not have access to view or download this file.
Become a Contributing Member to gain access to this feature. Click Here

DIY 4X4 Plasma/Router Table
CandCNC DTHC-IV & Feather Touch
Hypertherm PM65 Machine Torch
Drag Knife and Scribe
Miller Mig welder
13" metal lathe
Small Mill
Everlast PM 256 tig

Leeroy6392
Posts: 17
Joined: Mon Jun 17, 2019 9:39 pm
Location: Tulsa ok

Re: Circle problems

Post by Leeroy6392 » Sat Aug 24, 2019 3:19 pm

thanks for the help again and acourtjester I would never have figured that out on how to convert it.

You do not have access to view or download this file.
Become a Contributing Member to gain access to this feature. Click Here


Leeroy6392
Posts: 17
Joined: Mon Jun 17, 2019 9:39 pm
Location: Tulsa ok

Re: Circle problems

Post by Leeroy6392 » Sat Aug 24, 2019 3:44 pm


Post Reply

Return to “Mach3 CNC”

Easyscriber engrave attachment for Hypertherm plasma cutters.