Mach 4 trips “disable”

Mach3 and Mach4 questions, tips and topics can be posted here
Post Reply
Wership
1/2 Star Member
1/2 Star Member
Posts: 2
Joined: Mon Mar 08, 2021 3:56 pm

Mach 4 trips “disable”

Post by Wership »

Plasma 4848
Mach4, Hypertherm 45xp, Sheetcam
ground on work piece

Mach 4 trips “disable” after cutting a small text vector. Clicking enable lets it keep going with letters.
I know it's not a good practice because eventually it will make the wrong move... been there done that.

If it stops, I can go back to Sheetcam and move the start point, reload the gcode and usually get it to complete the shape.
So I know it works, just not consistently.

Sometimes it will alarm consumables on 45xp, but if I unscrew the nozzle and screw it back in, it will still work.
Sometimes it will pierce and not move.

There doesn’t seem to be a consistent enough problem to diagnose, or search for...
Post Reply

Return to “Mach3 & Mach4 CNC”