Thermal Dynamics iCNC System

Buy and sell used plasma cutting and related equipment here.
Post Reply
User avatar
HARJO
1 Star Member
1 Star Member
Posts: 17
Joined: Fri Jan 06, 2017 7:25 pm
Location: Idaho

Thermal Dynamics iCNC System

Post by HARJO »

IMG_0125.jpg
IMG_0125.jpg (84.73 KiB) Viewed 5812 times
IMG_0125.jpg
IMG_0125.jpg (84.73 KiB) Viewed 5812 times
Back on the market... I'd had multiple buyers in the past who have all backed out. Upgrading or building a new table isn't in my immediate need any longer. Invoice total was $19,389.20. Make a reasonable offer. Shipping costs are the responsibility of the buyer, located in 83647. Pic uploads keep erroring out, working on getting them posted.


All Brand New:
iCNC Controller w/internal torch height control
Three NEMA34 motors
Three NEMA34 1:10 gearboxes
75v Power supply for motors
24v Power supply, 6.7amp w/cable for controller
i/o and motor pcb
iCNC Office software bundle, Level 1 & 2, MicroCAD, cost calculator, feedrate module
50' motor cables
100' ohmic cable
Various ground wires
Motor Power Cables
Last edited by HARJO on Mon Oct 23, 2023 11:14 am, edited 1 time in total.
Pspider Support
2 Star Member
2 Star Member
Posts: 76
Joined: Tue Jul 22, 2008 3:26 pm

Re: Thermal Dynamics iCNC System

Post by Pspider Support »

Reduce your image size to 1Mb or less and they should upload just fine.
Pspider Support
Contact Me via PM
cutnweld
3 Star Member
3 Star Member
Posts: 297
Joined: Mon Oct 14, 2019 1:47 pm

Re: Thermal Dynamics iCNC System

Post by cutnweld »

Just curious what route you took instead of utilizing this package? I am currently running Linux and like it, but like to see other controllers etc and there strong points
5X10 Shop built table
20x80x32 inch gap lathe
10x40 lathe
10x54 milling machine
2-Miller 255
Miller XMT350MPA
Lincoln squarewave tig 255
12 Ft Durma Brake
User avatar
HARJO
1 Star Member
1 Star Member
Posts: 17
Joined: Fri Jan 06, 2017 7:25 pm
Location: Idaho

Re: Thermal Dynamics iCNC System

Post by HARJO »

cutnweld wrote: Sat Oct 21, 2023 2:52 pm Just curious what route you took instead of utilizing this package? I am currently running Linux and like it, but like to see other controllers etc and there strong points
I have a homebuilt table that I built many years ago from an ebay kit that works just fine for my use in the shop. My business isn't centered around plasma CNC, moreso tube fabrication for motorsports. I really only use my current table to make one-off tabs and plates for what I do, and I don't really have a desire anymore to chase plasma cutting as a primary focus of the business.
User avatar
HARJO
1 Star Member
1 Star Member
Posts: 17
Joined: Fri Jan 06, 2017 7:25 pm
Location: Idaho

Re: Thermal Dynamics iCNC System

Post by HARJO »

Someone in the PM's asked me to post some of the motor specs:

Teknic model CPM-SDSK-3432P-RLN
NEMA34 frame
698oz-in peak torque
2,380 RPM

Neugart PLPE090 10:1 planetary gearboxes for mating to NEMA34
Attachments
IMG_7749.jpg
IMG_7748.jpg
IMG_7747.jpg
Post Reply

Return to “Classified Ads”