ESAB Sabre 3000 w/CS Labs conversion

Buy and sell used plasma cutting and related equipment here.
Post Reply
Elite Contributing Member
Elite Contributing Member
Posts: 18
Joined: Wed Jun 28, 2017 7:53 am

ESAB Sabre 3000 w/CS Labs conversion

Post by john78 » Thu Oct 31, 2019 2:00 pm

[email protected]

CALL OR TEXT @ 559-960-2802

$24,000.00 asking price.

Reconditioned and updated Esab Sabre 3000 (Build Date 5/98)

Table has a 11'x 8' working area

Rails are 16' long. Gantry is approx 13' wide.
Does not come with plasma cutter. Once your needs are determined I suggest purchasing or providing one and we can set it up and configure to the machine to function.
Setup for Hypertherm Powermax series plasma cutter but can be adapted for other units. Must check for details and compatibility.
Gantry has all new bearings.
Motors and gearboxes have been rebuilt.
New Koyo TRDA-25 series encoders
HP Thin Client PC
Mach3 Software and License Included

Electronics have been retrofitted with CS Labs CSMIO/IP-A 6- AXIS Motion Controller ... onnectors/

Velox Z Axis Torch Lifter - 4.5" Plasma Z Axis, Linear Slide

Proma THC 150 Torch Height control.

CandCNC Feather Touch Ohmic Sensor

Galt Water Table - Water table has not been rebuilt and is sold as is

You do not have access to view or download this file.
Become a Contributing Member to gain access to this feature. Click Here

4x4 Plasma Table
Mach3 with CSMIO/IP-M
CandCNC Feather Touch & LCTHC
Hypertherm PMX 1000

Post Reply

Return to “Classified Ads”

Easyscriber engrave attachment for Hypertherm plasma cutters.