sheetcam Beta Testing

SheetCam related questions and tips can be posted here
Post Reply
robertspark
4.5 Star Elite Contributing Member
4.5 Star Elite Contributing Member
Posts: 1806
Joined: Mon Jun 12, 2017 6:43 pm

sheetcam Beta Testing

Post by robertspark »

https://forum.sheetcam.com/viewtopic.ph ... 558#p27557

in an altruistic effort to help Les and ourselves as sheetcam users and advocates given it will be in all of our best interests to pick up any issues if we can with our normal workflow, it is best if you are able to to given the current beta version a test and provide some useful comments
Dfabltd
1 Star Member
1 Star Member
Posts: 14
Joined: Sun Oct 27, 2019 2:47 am

Re: sheetcam Beta Testing

Post by Dfabltd »

Hi Robert
I have been using the sheetcam for a while now, I think i have found some small bits ill take note of them and pop them on here
Dfabltd
1 Star Member
1 Star Member
Posts: 14
Joined: Sun Oct 27, 2019 2:47 am

Re: sheetcam Beta Testing

Post by Dfabltd »

Ok first problem for me, when adding a shape from the built in library
Would it be possible to have it added to the parts section as an individual part not as a layer on your existing nested parts
AREA
3 Star Member
3 Star Member
Posts: 267
Joined: Thu Jul 19, 2012 3:36 am

Re: sheetcam Beta Testing

Post by AREA »

robertspark wrote: Sat Sep 19, 2020 7:16 am https://forum.sheetcam.com/viewtopic.ph ... 558#p27557

in an altruistic effort to help Les and ourselves as sheetcam users and advocates given it will be in all of our best interests to pick up any issues if we can with our normal workflow, it is best if you are able to to given the current beta version a test and provide some useful comments
Sounds good, I have had a couple things worth mentioning however I will get the beta version installed, work with it, and post back to the sheetcam forum link in your original post with any useful comments :Like
Post Reply

Return to “SheetCam”