Struggling already - Sheetcam Post Error

[wiltshire_chris]

So I gave in with fusion and have gone down the sheetcam route. Any ideas on this?

[adbuch]

I don't use sheetcam, but post your file and I will show you how to post it with Fusion 360.
David

[wiltshire_chris]

the reason for swapping was because fusion doesn't have a post for linuxcnc plasma, I've used it with success with GRBL

[acourtjester]

Looking at the error you posted, could you have selected a laser post processor??
try using LinuxCNC PlasmaC

[djreiswig]

You can edit the post and look at line 139. Might give you a clue what variable has the invalid value. Maybe a tool parameter is missing.

[wiltshire_chris]

Turned out I set the post processor to laser not plasma
It's been a massive learning curve, but I can say that today I cut my first parts. To say I'm relieved is a understatement, many thanks to the people that helped along the way

[acourtjester]

Nice cut thanks for the update reply

[weldguy]

Ah, that could do it. Thanks for posting your solution