Table Trestle Drawing

Kellbog · Post by **Kellbog** » Sat Mar 16, 2019 3:19 pm

New to all of this and I’m making a desk for my office. Would love to get this into dxf file 24”widex34”tall

Any help is appreciated

Post by **acourtjester** » Sat Mar 16, 2019 7:32 pm

some time back this guy plasma cut a set of table legs similar to that you may contact him and ask to the file. He gave me a copy but I don't know where it is.
https://www.youtube.com/user/turbocobra/videos

hemichargersrt8 · Post by **hemichargersrt8** » Mon Mar 25, 2019 11:36 pm

Originally designed to be laser cut, check tab and slot clearance for your situation. Basically upper and lower are copies of each other.

Trestle 4 375 ms 2 pcs.DXF

Trestle 3 375 ms 4 pcs.DXF

Trestle 2 375 ms 4 pcs.DXF

Trestle 1 375 ms 4 pcs.DXF

steel 35 · Post by **steel 35** » Tue Mar 26, 2019 1:27 pm

Good to see your amazing stuff now and then

Thanks for sharing

hemichargersrt8 · Post by **hemichargersrt8** » Tue Mar 26, 2019 1:29 pm

Just been a super busy year, not sure where the time has gone

Post by **plasmanewbie** » Mon Apr 01, 2019 9:34 am

This is awesome, thanks for sharing!

Post by **mmentel5** » Mon Apr 01, 2019 12:46 pm

thank you so cool!!!

Post by **sbest1** » Mon Apr 01, 2019 1:03 pm

Thank you so much

Post by **Ray Maas** » Mon Apr 01, 2019 4:54 pm

thank you great table what is plate thickness

Post by **david jordan** » Tue Apr 02, 2019 7:30 am

Thank you.

Gittlecut · Post by **Gittlecut** » Tue Apr 02, 2019 11:07 am

ive been making these tables for sometime now
@thecutmiami

hemichargersrt8 · Post by **hemichargersrt8** » Thu Apr 04, 2019 11:36 am

3/8" steel plate, material thickness and quantity are in the file name

techno · Post by **techno** » Thu Apr 04, 2019 9:50 pm

Thanks for sharing

hemichargersrt8 · Post by **hemichargersrt8** » Fri Apr 05, 2019 9:16 am

Thanks KD MetalWerks, noticed the quantities were incorrect in the file names, Hopefully this drawing will clear up the confusion. The quantities in the file name are for one table leg set.(Upper and Lower). Now, I am confused !

motoguy · Post by **motoguy** » Fri Apr 12, 2019 3:36 pm

Thanks Paul!

Psddynel · Post by **Psddynel** » Fri Apr 12, 2019 4:23 pm

Thanks you very much.

skipweidner · Post by **skipweidner** » Sun Apr 14, 2019 2:08 pm

Thanks I will be building one soon

Post by **BILLETMAN** » Tue Apr 16, 2019 5:17 pm

VERY COOL thank you Hemicharger

Post by **BILLETMAN** » Tue Apr 16, 2019 5:17 pm

love the idea

karltatt2 · Post by **karltatt2** » Fri Apr 19, 2019 4:58 am

super thank you

karltatt2 · Post by **karltatt2** » Fri Apr 19, 2019 4:58 am

super thank you

Post by **Dennis** » Sat Apr 20, 2019 12:51 pm

If you go to cut this file ( TRESTLE 3 ) is wrong. I think it was loaded as #2 by accident.

Post by **Dennis** » Sat Apr 20, 2019 2:02 pm

Here is a start , going to make it a Picnic Table. Will shrink the files and use them as matching benches.

omng945 · Post by **omng945** » Sun Apr 21, 2019 11:08 am

Dennis, where did you get your clamps?

lockeyone · Post by **lockeyone** » Sun Apr 21, 2019 1:17 pm

They look like Bessey Sliding Arm clamps.

Table Trestle Drawing

Table Trestle Drawing

Re: Help with a drawing

Re: Help with a drawing

Re: Help with a drawing

Re: Help with a drawing

Re: Table Trestle Drawing

Re: Table Trestle Drawing

Re: Table Trestle Drawing

Re: Table Trestle Drawing

Re: Table Trestle Drawing

Re: Table Trestle Drawing

Re: Table Trestle Drawing

Re: Table Trestle Drawing

Re: Table Trestle Drawing

Re: Table Trestle Drawing

Re: Table Trestle Drawing

Re: Table Trestle Drawing

Re: Table Trestle Drawing

Re: Table Trestle Drawing

Re: Table Trestle Drawing

Re: Table Trestle Drawing

Re: Table Trestle Drawing

Re: Table Trestle Drawing

Re: Table Trestle Drawing

Re: Table Trestle Drawing