Ford 9"

Fabramicator · Post by **Fabramicator** » Tue Dec 05, 2017 5:49 am

I have been wanting to cut and build my own ford 9" housing. Does anyone have a file for it?

Ratboyracer · Post by **Ratboyracer** » Wed Dec 06, 2017 9:17 am

I have a file that will get you close. It will be later today before I can get to it.

Ratboyracer · Post by **Ratboyracer** » Wed Dec 06, 2017 7:14 pm

This may help...

Ford9inch.dxf

Fabramicator · Post by **Fabramicator** » Thu Dec 07, 2017 8:49 am

Already have that info was really needing something for the housing pieces. Thanks

Lewis Fab · Post by **Lewis Fab** » Thu Dec 07, 2017 10:28 am

I have the front plate for the third to bolt to that i have cut and fits well. I have not had time to sit down and figure out the rest yet. I think this might be same as what Ratboyracer posted but its ready for cam software. I will add my file that I have started on the rest of the parts but there not complete yet. Hope it helps.

L-FAB 9 DESIGN.DXF

L-FAB 9 FRONT.DXF

Fabramicator · Post by **Fabramicator** » Thu Jan 04, 2018 2:31 am

Thanks I'm interested to see the rest when you get it done.

Fabramicator · Post by **Fabramicator** » Thu Dec 06, 2018 11:34 pm

I found this yesterday. https://www.warfighterfabrication.com/p ... -9-housing

MustangMat · Post by **MustangMat** » Sun Dec 09, 2018 1:15 am

I have some pdf files for a whole center section if someone wants

Fabramicator · Post by **Fabramicator** » Sun Dec 09, 2018 5:30 pm

Let me guess, wyotech pdf?

MustangMat · Post by **MustangMat** » Sat Dec 15, 2018 11:53 am

yes the wyotech one.

Post by **aicomp** » Sat Dec 15, 2018 3:12 pm

Would love to have the pdf files. mike@penningtonfab.com
Thanks.
Mike

bryantar74 · Post by **bryantar74** » Tue Jan 08, 2019 12:55 am

anyone get this built? or have a file for the back?

WESBEECH · Post by **WESBEECH** » Tue Mar 12, 2019 4:29 pm

You say wyotech pdf like they are bad?

Lewis Fab · Post by **Lewis Fab** » Tue Jun 11, 2019 8:06 pm

Here is a couple of ones ive bulit since posting the files.

Post by **plasmanewbie** » Wed Jun 12, 2019 10:36 am

WOW and WOW Lewis Fab!!!! That is outstanding. Hardcore

Uzaree · Post by **Uzaree** » Wed Jun 12, 2019 11:19 pm

Wanted to show off some of our Ford 9" We cut these for one of our customers. We laser cut these and CNC bend them. These are made from Chromoly

IMG_5722.JPG

IMG_5721.JPG

IMG_5720.JPG

IMG_5719.JPG

IMG_5718.JPG

Post by **plasmanewbie** » Thu Jun 13, 2019 11:14 am

Uzaree wrote: ↑Wed Jun 12, 2019 11:19 pm Wanted to show off some of our Ford 9" We cut these for one of our customers. We laser cut these and CNC bend them. These are made from Chromoly

Mind blown

Stunning work to say the least

ETCWeld · Post by **ETCWeld** » Sat Jun 15, 2019 11:02 am

plasmanewbie wrote: ↑Thu Jun 13, 2019 11:14 am
Uzaree wrote: ↑Wed Jun 12, 2019 11:19 pm Wanted to show off some of our Ford 9" We cut these for one of our customers. We laser cut these and CNC bend them. These are made from Chromoly

Mind blown

Stunning work to say the least

WHat he said... Nice Work!

theonlybull · Post by **theonlybull** » Sun Jun 16, 2019 7:32 am

beautiful work guys

theonlybull · Post by **theonlybull** » Sun Jun 16, 2019 7:33 am

beautiful work guys

Lewis Fab · Post by **Lewis Fab** » Thu Jun 20, 2019 2:05 pm

Thanks guys, I would like to know more about Uraree's rear end jig, that thing is badass! I was unable to find anything about it on the internet.

Uzaree · Post by **Uzaree** » Mon Jun 24, 2019 3:19 pm

Lewis Fab wrote: ↑Thu Jun 20, 2019 2:05 pm Thanks guys, I would like to know more about Uraree's rear end jig, that thing is badass! I was unable to find anything about it on the internet.

Lewis,

I'm sorry I have been out a good bit and for some reason this website doesn't notify me when there is a response. The fixture is actually designed by a good friend of mine. I will PM you his contact. I cut all the parts for him but he sells them.

Post by **Muffinman77** » Wed Nov 13, 2019 1:27 pm

Has anyone came up with a full file for the back of the housing yet?

You guys have some great work posted in here

HTX_Metal_Head · Post by **HTX_Metal_Head** » Mon Feb 03, 2020 4:45 pm

lewis and uzaree you both killed it. hope to one day be able to do the same. just ordered the mitler bros through bar setup so i can start narrowing and building custom axles. keep up the awsome work.

WESBEECH · Post by **WESBEECH** » Thu Feb 13, 2020 8:08 am

Can you please post some pictures of that fixture table for doing the axles.

Ford 9"

Ford 9"

Re: Ford 9"

Re: Ford 9"

Re: Ford 9"

Re: Ford 9"

Re: Ford 9"

Re: Ford 9"

Re: Ford 9"

Re: Ford 9"

Re: Ford 9"

Re: Ford 9"

Re: Ford 9"

Re: Ford 9"

Re: Ford 9"

Re: Ford 9"

Re: Ford 9"

Re: Ford 9"

Re: Ford 9"

Re: Ford 9"

Re: Ford 9"

Re: Ford 9"

Re: Ford 9"

Re: Ford 9"

Re: Ford 9"

Re: Ford 9"