Doubler plate dxf

If you are looking for help with a file conversion please post it here rather than in the file sharing forums.
Post Reply
Kurtboyd
1/2 Star Member
1/2 Star Member
Posts: 1
Joined: Sat Jun 05, 2021 12:05 am

Doubler plate dxf

Post by Kurtboyd »

Hi all,
I need a doubler plate made and my design skills are lacking. I'm just getting started with Librecam. I have attached a scanned image of the part which is actual size. The plate needs to have an oblong hole in at shown. I've listed measurements from outside edge of plate to outside edge of hole.

Any help would be appreciated

Thanks

Kurt

You currently do not have access to download this file.
To gain download access for DXF, SVG & other files Click Here

adbuch
6 Star Elite Contributing Member
6 Star Elite Contributing Member
Posts: 8599
Joined: Thu Sep 21, 2017 5:22 pm
Location: Tucson, Arizona
Contact:

Re: Doubler plate dxf

Post by adbuch »

Here is a quick auto trace of your image and scaled to match your dimensions, but the numbers don't seem to add up. Perhaps you could show us what progress you have made using Librecad and we can go from there. Or provide a sketch with accurate dimensions showing exactly what measurement points you are using for your dimensions.
David
numbers do not seem to add up.jpg

You currently do not have access to download this file.
To gain download access for DXF, SVG & other files Click Here

Post Reply

Return to “File Conversion Help Wanted”