Trying to make sure on my drop outs.-Pine Mountain

Share, browse, & download dxf, svg, or other vector based designs. If you take be sure to give back.
User avatar
BrianMick
4 Star Elite Contributing Member
4 Star Elite Contributing Member
Posts: 976
Joined: Sun Dec 06, 2009 8:00 am
Location: St. Cloud,Minnesota United States of America
Contact:

Re: Trying to make sure on my drop outs.

Post by BrianMick »

Just remember guys...those takers will be out of business in a year or so anyway, because they never learned to do anything themselves. And the ones that have learned to do stuff themselves have since become contributors..it doesn't happen overnight. For all of the FREELOADERS there are on this site I still think it has been worth its weight in gold being a member.....And to those that would like a thankyou I thank you very much....and thank you a thousand time for the future....as I am sometimes too busy to say it. Thanks,Thanks,Thanks,Thanks,Thanks,Thanks,Thanks,Thanks,Thanks,Thanks,Thanks,Thanks,Thanks,Thanks,Thanks,Thanks,Thanks,Thanks,Thanks,Thanks,
Thanks,Thanks,Thanks,Thanks,Thanks,Thanks,Thanks,Thanks,Thanks,Thanks,Thanks,Thanks,Thanks,Thanks,Thanks,Thanks,Thanks,Thanks,Thanks,Thanks,Thanks,Thanks,Thanks,Thanks,Thanks,Thanks,Thanks,Thanks,Thanks,Thanks,Thanks,Thanks,Thanks,Thanks,Thanks,Thanks,Thanks,Thanks,Thanks,Thanks,Thanks,Thanks,Thanks,Thanks,Thanks,Thanks,Thanks,Thanks,Thanks,Thanks,Thanks,Thanks,
Thanks,Thanks,Thanks,Thanks,Thanks,Thanks,Thanks,Thanks,Thanks,Thanks,Thanks,Thanks,Thanks,Thanks,Thanks,Thanks,Thanks,Thanks,Thanks,Thanks,Thanks,Thanks,Thanks,Thanks,Thanks,Thanks,Thanks,Thanks,Thanks,Thanks,Thanks,Thanks,Thanks,Thanks,Thanks,Thanks,Thanks,Thanks,Thanks,Thanks,Thanks,Thanks,Thanks,Thanks,Thanks,Thanks,Thanks,Thanks,Thanks,Thanks,Thanks,Thanks,Thanks,Thanks,Thanks,Thanks,Thanks,Thanks,Thanks,Thanks,Thanks,Thanks,Thanks,Thanks,Thanks,Thanks,
Thanks,Thanks,Thanks,Thanks,Thanks,Thanks,Thanks,Thanks,Thanks,Thanks,Thanks,Thanks,Thanks,Thanks,Thanks,Thanks,Thanks,Thanks,Thanks,Thanks,Thanks,Thanks,Thanks,Thanks,Thanks,Thanks,Thanks,Thanks,Thanks,Thanks,Thanks,Thanks,Thanks,Thanks,Thanks,Thanks,Thanks,Thanks,Thanks,Thanks,Thanks,Thanks,Thanks,Thanks,Thanks,Thanks,Thanks,Thanks,Thanks,Thanks,Thanks,Thanks,
Thanks,Thanks,Thanks,Thanks,Thanks,Thanks,Thanks,Thanks,Thanks,Thanks,Thanks,Thanks,Thanks,Thanks,Thanks,Thanks,Thanks,Thanks,Thanks,Thanks,Thanks,Thanks,Thanks,Thanks,Thanks,Thanks,Thanks,Thanks,Thanks,Thanks,Thanks,Thanks,Thanks,Thanks,Thanks,Thanks,Thanks,Thanks,Thanks,and thanks
Brian
AIRFLOWKID
2.5 Star Member
2.5 Star Member
Posts: 223
Joined: Sun Sep 27, 2009 9:48 pm

Re: Trying to make sure on my drop outs.

Post by AIRFLOWKID »

I too do not say thank you as often as I should. Thanks to all the gentleman and ladies on this site for sharing and helping others with file and knowledge!

Thanks so much, Tim :ugeek:
aicomp
2.5 Star Elite Contributing Member
2.5 Star Elite Contributing Member
Posts: 233
Joined: Wed Feb 02, 2011 5:15 pm
Location: Santa Anna Texas
Contact:

Re: Trying to make sure on my drop outs.

Post by aicomp »

I have learned more here than anywhere else/
Thanks So Much,
Mike
Torchmate 3 with Accumove 3
Hypertherm 1250
Hypertherm 85
Hypertherm 380
Lincoln V205T Tig
Lincoln wirematic 250
Eastwood 175 with Spoolgun
Eastwood 135 Mig
User avatar
acourtjester
6 Star Elite Contributing Member
6 Star Elite Contributing Member
Posts: 8501
Joined: Sat Jun 02, 2012 6:04 pm
Location: Pensacola, Fla

Re: Trying to make sure on my drop outs.

Post by acourtjester »

There is a Pseudo thank you under the download file name in the form of download number. I look at it as that is the number of thank you for your file. In your business when someone buys your art many don?t say thank you but by buying it you know they are pleased with it. Also when they display it in their home/business many will say that?s nice but you don?t hear that either.
This country is full of givers and takers that is life most givers will keep on giving even if they are not thanked each time. There is a pleasure in helping that is realized by the giver that taker cannot be take away. My 2 cents :)
DIY 4X4 Plasma/Router Table
Hypertherm PM65 Machine Torch
Drag Knife and Scribe
Miller Mig welder
13" metal lathe
Small Mill
Everlast PowerTig 255 EXT
User avatar
tnbndr
4.5 Star Elite Contributing Member
4.5 Star Elite Contributing Member
Posts: 1718
Joined: Mon Jan 09, 2012 4:30 pm
Location: New Berlin, WI
Contact:

Re: Trying to make sure on my drop outs.

Post by tnbndr »

Thanks,Thanks,Thanks,Thanks,Thanks,Thanks,Thanks,Thanks,Thanks,Thanks,Thanks,Thanks,Thanks,Thanks,Thanks,Thanks,Thanks,Thanks,Thanks,Thanks,Thanks,Thanks,Thanks,Thanks,Thanks,Thanks,Thanks,Thanks,Thanks,Thanks,Thanks,Thanks,Thanks,Thanks,Thanks,Thanks,Thanks,Thanks,Thanks,Thanks,Thanks,Thanks,Thanks,Thanks,Thanks,Thanks,Thanks,Thanks,Thanks,Thanks,Thanks,Thanks,
Thanks,Thanks,Thanks,Thanks,Thanks,Thanks,Thanks
I seldom say "thanks" because I hate opening posts and just reading a million thank yous. Sorry just me! but that is why I would like to see a "like" button or perhaps a "thank you" button.
Dennis
ComMarker B6 Galvo MOPA Fiber Laser
Hypertherm PM30 Hand Torch
RolAir 3HP Single Stage 30 Gal
13.8scfm@100psi, 3450RPM
Miller 215 MultiMatic
RW 390E Slip Roll (Powered)
AutoCAD, SheetCAM, Mach 3, Lightburn
aicomp
2.5 Star Elite Contributing Member
2.5 Star Elite Contributing Member
Posts: 233
Joined: Wed Feb 02, 2011 5:15 pm
Location: Santa Anna Texas
Contact:

Re: Trying to make sure on my drop outs.

Post by aicomp »

Great Idea
Torchmate 3 with Accumove 3
Hypertherm 1250
Hypertherm 85
Hypertherm 380
Lincoln V205T Tig
Lincoln wirematic 250
Eastwood 175 with Spoolgun
Eastwood 135 Mig
User avatar
Larry83301
5 Star Elite Contributing Member
5 Star Elite Contributing Member
Posts: 2608
Joined: Tue Oct 27, 2009 6:36 pm
Location: Twin Falls, Idaho

Re: Trying to make sure on my drop outs.

Post by Larry83301 »

Have you noticed that a large number of posts do not contain a picture so you must download the file to find out if it is something you may or may not use. So you either thank the poster for a file that you may never use or you forget to thank a poster for a file you open a week later and use it the next day.
Posting a picture with the DXF sure would make it easier to thank the posters that make files you use and not just everybody. :D :D :D

Larry
MIFab
3 Star Member
3 Star Member
Posts: 251
Joined: Tue Apr 16, 2013 8:47 pm

Re: Trying to make sure on my drop outs.

Post by MIFab »

Posting a picture is a great help ! I agree we need a thump's up button !
User avatar
CNCCAJUN
4 Star Member
4 Star Member
Posts: 1103
Joined: Mon Dec 26, 2011 11:38 pm
Location: Baton Rouge, LA

Re: Trying to make sure on my drop outs.

Post by CNCCAJUN »

MIFab wrote:Posting a picture is a great help ! I agree we need a thump's up button !
I agree, I have downloaded a lot of files just to look at them. i.e. the ones that were made for local teams, local businesses, things I have no interest in. . . files with a moose or a snowmobile or not popular here in Louisiana :D :D :D

Anybody want a file with crawfish? :D

Steve
Smiling Gator Metal Works, LLC
Dynatorch 4X4 XLS
PowerMAX 85
Baton Rouge, Louisiana
User avatar
Larry83301
5 Star Elite Contributing Member
5 Star Elite Contributing Member
Posts: 2608
Joined: Tue Oct 27, 2009 6:36 pm
Location: Twin Falls, Idaho

Re: Trying to make sure on my drop outs.

Post by Larry83301 »

I'll take the file of Crawfish If you include a couple pounds of live ones with it! :lol: :lol: :lol:
If not I'd still enjoy the file, got kids that live near the Sacramento river in CA they love them TOO!


Larry
User avatar
tnbndr
4.5 Star Elite Contributing Member
4.5 Star Elite Contributing Member
Posts: 1718
Joined: Mon Jan 09, 2012 4:30 pm
Location: New Berlin, WI
Contact:

Re: Trying to make sure on my drop outs.

Post by tnbndr »

so you must download the file to find out if it is
When I click the file to download, my computer asks me if I want to "open, save or cancel" I open the file first if there is no picture. I use Irfranview as a dxf viewer and it opens the files quickly for a preview. If I like what I see then I save it.
Takes a few extra seconds.
Dennis
ComMarker B6 Galvo MOPA Fiber Laser
Hypertherm PM30 Hand Torch
RolAir 3HP Single Stage 30 Gal
13.8scfm@100psi, 3450RPM
Miller 215 MultiMatic
RW 390E Slip Roll (Powered)
AutoCAD, SheetCAM, Mach 3, Lightburn
radicalrescue
3 Star Member
3 Star Member
Posts: 373
Joined: Thu May 28, 2015 8:02 am
Location: Merritt island fl.

Re: Trying to make sure on my drop outs.

Post by radicalrescue »

CNCCAJUN wrote:
MIFab wrote:Posting a picture is a great help ! I agree we need a thump's up button !
I agree, I have downloaded a lot of files just to look at them. i.e. the ones that were made for local teams, local businesses, things I have no interest in. . . files with a moose or a snowmobile or not popular here in Louisiana :D :D :D

Anybody want a file with crawfish? :D

Steve
yaa i would like to have what ever u have with crawfish ..an if u u cant get any crawfish next season hit me up .
K D Metalwerks
3 Star Elite Contributing Member
3 Star Elite Contributing Member
Posts: 389
Joined: Sun Jan 22, 2012 5:39 pm

Re: Trying to make sure on my drop outs.-Pine Mountain

Post by K D Metalwerks »

Thanks for the file. Just what my customer wants. Very nice work.
K D Metal Werks
PlasmaCam DHC2
Hypertherm Power Max 45
Hobart Handler 190 Mig
Niagara 3"x 36" Slip Roll 14ga
Driess/ Krumph 4' box & pan brake 16ga
Hossfeld #2 Bender Ridgid 700 threader
Pexto 137-1 16ga. Stomp Shear
MADE IN USA
User avatar
Joe Jones
5 Star Elite Contributing Member
5 Star Elite Contributing Member
Posts: 3836
Joined: Sat Oct 11, 2014 2:33 pm
Location: Franklin, KY., USA
Contact:

Re: Trying to make sure on my drop outs.-Pine Mountain

Post by Joe Jones »

That file still needs work

Joe
FREE DesignEdge Training Online

Two hobby shops (9,790 sq. ft.) full of machines and tools
Post Reply

Return to “DXF & SVG Plasma Cutting File Sharing Forum”