Dragon Heart

Share, browse, & download dxf, svg, or other vector based designs. If you take be sure to give back.
Post Reply
ericandmollie
2.5 Star Elite Contributing Member
2.5 Star Elite Contributing Member
Posts: 114
Joined: Wed Oct 28, 2009 4:45 pm

Dragon Heart

Post by ericandmollie »

Here is something that I just put together for a friend. If someone could attach a tribal heart around the dragons without all the pieces falling out, that would be even cooler.

Image
Dragon_Heart.DXF

You currently do not have access to download this file.
To gain download access for DXF, SVG & other files Click Here

User avatar
Metal Troll
2 Star Member
2 Star Member
Posts: 82
Joined: Wed Sep 23, 2009 12:06 pm
Location: Phoenix Arizona

Re: Dragon Heart

Post by Metal Troll »

WOW thats some amazing design work. What would you all suggest cutting that out with (plasma cutter, laser, or waterjet) to get the amount of detail to really stay? It looks to me that it would be hard for a plasma cutter to do. I could be wrong, it wouldn't be the first or the last time.
ericandmollie
2.5 Star Elite Contributing Member
2.5 Star Elite Contributing Member
Posts: 114
Joined: Wed Oct 28, 2009 4:45 pm

Re: Dragon Heart

Post by ericandmollie »

I am not familar with plasma cutting details. I only have access to a 2000 watt trumpf laser. If you laser it, cut it with nitrogen so the corners will not burn.
cuttinparts
3 Star Member
3 Star Member
Posts: 351
Joined: Tue Sep 30, 2008 3:40 pm

Re: Dragon Heart

Post by cuttinparts »

Snooping around and dug this cool design up from the archives! Looks like at 24" in size you could cut this with plasma with no mods, will need to be tweaked some if you wanted to cut it smaller in size.
plasmanewbie
4.5 Star Elite Contributing Member
4.5 Star Elite Contributing Member
Posts: 2567
Joined: Thu Jul 24, 2008 11:15 am

Re: Dragon Heart

Post by plasmanewbie »

Nice! I have been around here for many years and haven't seen that one.
User avatar
Joe Jones
5 Star Elite Contributing Member
5 Star Elite Contributing Member
Posts: 3041
Joined: Sat Oct 11, 2014 2:33 pm
Location: Franklin, KY., USA
Contact:

Re: Dragon Heart

Post by Joe Jones »

Metal Troll wrote: Thu Mar 25, 2010 4:02 pm WOW thats some amazing design work. What would you all suggest cutting that out with (plasma cutter, laser, or waterjet) to get the amount of detail to really stay? It looks to me that it would be hard for a plasma cutter to do. I could be wrong, it wouldn't be the first or the last time.
Plasma cutting is all about resolution. If you sign a check with a fat magic marker, no one will be able to read the signature. However, if you write your name on a large wall with that same marker, every detail of your signature is evident.

This particular design would cut very well on a plasma table AT 72 INCHES WIDE.

Joe



.
Franklin, KY., USA
Samson 510 & 4x4
6” Z Rail Lift Kit for PlasmaCam
CreatBot D600 PRO 3D Printer
12 Lasers
FREE DesignEdge Training!

It is more fun when it isn't necessary!
Post Reply

Return to “DXF & SVG Plasma Cutting File Sharing Forum”