Waterlooboy tractor DXF design

[BrianMick]

looking for a dxf of a waterloo boy tractor if any one can help. I just cant seem to get a good conversion.

[Jetdctr]

Here's a Waterloo Boy for you.

And before I get asked, YES this is my Drawing start to finish, not a copy, trace or conversion!
I did refer to a photo, just like drawing a bowl of fruit sitting on the table (Look and then Draw).

Enjoy Bob

This is fresh off the presses and has not been cut or tested! So be warned.

And an occassional Thanks from the grabbers out there would be nice for those who contribute!

Waterloo Boy.dxf

[AIRFLOWKID]

Bob,
Thanks for the waterloo . They are a popular attraction at are local Farm Show each year. Very nice work.

Tim
Red Robin Creatives

[BrianMick]

Thanks Bob it looks great, my customer will be pleased!
I cut it out allready at 14" tall the only thing i had to tweak was the letters.

your my hero,
Brian
P.S this is why this site rocks, thanks to all that help every one out!!!!!!!!!!!!!!!!!!

[Jetdctr]

Thanks for the compliments, you are welcome!



Brian, if you can post a photo of the final cutout that would be awesome.

Thanks Bob

[Ironman]

Thanks for the file, old tractors will always be in style

[BrianMick]

I will try and post the photo next time i cut it......they were just picked up so I have to wait
but he said he would like more. hopefully sooon.......


thanks again bob,
Brian

[Larry83301]

I just cut this one, thought I would post a pic. I work in plywood, and paint them black. This one is about 26" long, cut with an 1/8" endmill.

Larry

waterloo boy.JPG

[Jetdctr]

That is cool!

Thanks for sharing the photo.

[kicktillmonday]

This is fantastic! Exactly what I was looking for to make a xmas gift and as super clean crisp design to boot. Thank you Jetdctr

[harrymorley]

Never even knew they existed. Great post . Thank you

[Dirtmotor]

That's really neat , did you draw on paper then scan in or did you draw in a computer program ?

[kicktillmonday]

That's really neat , did you draw on paper then scan in or did you draw in a computer program ?

Looks like the original poster hasn't been on in a while but in his post he says he drew it freehand on the computer while referring to a picture. Now that takes some talent

[Dirtmotor]

Thanks , didn't notice how old the thread is . Definitely more talent and patience than I have .

[kicktillmonday]

Thanks , didn't notice how old the thread is . Definitely more talent and patience than I have .

Ya, same here

[Inwood fab]

Here is a basic one I had drew up last year for a customer.

PhotoRoom-20221113_111926.png

[adbuch]

Here is a basic one I had drew up last year for a customer.

PhotoRoom-20221113_111926.png

Inwood fab - very nicely done!! Thanks for sharing your work.
David

[shalfpap]

Thanks for sharing!

[david jordan]

thank you