20 Can spray bomb wall mount

Share, browse, & download dxf, svg, or other vector based designs. If you take be sure to give back.
Searchman
3 Star Member
3 Star Member
Posts: 418
Joined: Tue Aug 18, 2015 11:30 am

Re: 20 Can spray bomb wall mount

Post by Searchman »

Now I may get organized. Thanks for the two shares
DezertBlingMoto
2.5 Star Elite Contributing Member
2.5 Star Elite Contributing Member
Posts: 132
Joined: Sun Dec 08, 2013 3:53 pm

Re: 20 Can spray bomb wall mount

Post by DezertBlingMoto »

very nice upgrade , just cut my first . Will definitely be doing the 2 break one .
stuk4x4
1.5 Star Member
1.5 Star Member
Posts: 29
Joined: Thu Dec 24, 2015 9:19 am

Re: 20 Can spray bomb wall mount

Post by stuk4x4 »

Thanks to Allan101 and Old Iron for the file.
Walt
Hootville
2 Star Elite Contributing Member
2 Star Elite Contributing Member
Posts: 77
Joined: Sun Jan 03, 2016 2:46 am
Location: Pine Valley, Utah

Re: 20 Can spray bomb wall mount

Post by Hootville »

Now this is going to come in handy! Thanks Gents.
Hypertherm Powermax 65
4'x 8' Eagle Plasma Table
AutoCad Civil 3D
SheetCam
Mach3
Lincoln MIG
Everlast 256S Combo Arc/TIG/Plasma
Millermatic 211
tothwelding
1 Star Elite Contributing Member
1 Star Elite Contributing Member
Posts: 12
Joined: Mon Aug 20, 2018 10:06 pm
Location: tavares fl
Contact:

Re: 20 Can spray bomb wall mount

Post by tothwelding »

what a great idea. its the small things like this that some of us don't think about that really help.
User avatar
rons
2.5 Star Member
2.5 Star Member
Posts: 179
Joined: Thu Jul 23, 2015 2:26 pm
Location: Charlotte, NC

Re: 20 Can spray bomb wall mount

Post by rons »

Very nice but what we all need is a automatic can shaker
4x8 Home made with PPL Gantry
Bladder water table
Candcnc EtherCut + DTHCIV
Hypertherm PM 65 machine
Sheetcam, Mach 3
Corel DrawX7
TurboCad 2015
211 Miller Mig
Ingersoll Rand 7.5 hp 80 gal
Harbor Ref. Dryer
Lathe, BP, 1" x 12" Cosan Miter Saw,
abmetal
4 Star Elite Contributing Member
4 Star Elite Contributing Member
Posts: 797
Joined: Mon Dec 26, 2011 8:37 pm
Location: Southeast Missouri

Re: 20 Can spray bomb wall mount

Post by abmetal »

Harbor Freight shaker works great!

Allen
Enfib
1/2 Star Member
1/2 Star Member
Posts: 8
Joined: Thu Oct 04, 2018 6:13 pm

Re: 20 Can spray bomb wall mount

Post by Enfib »

fantastic idea sir, thanks for sharing...been looking for a good idea for bombs 6 months now..finally one that makes sense..thumbs up
gloria
1/2 Star Member
1/2 Star Member
Posts: 5
Joined: Thu Dec 16, 2010 11:30 am

Re: 20 Can spray bomb wall mount

Post by gloria »

looks awsome thanks
User avatar
acourtjester
6 Star Elite Contributing Member
6 Star Elite Contributing Member
Posts: 7770
Joined: Sat Jun 02, 2012 6:04 pm
Location: Pensacola, Fla

Re: 20 Can spray bomb wall mount

Post by acourtjester »

I cut the 20 can holder after I modified the file slightly. I wanted to hang it on the inside of my shop side door, and the leftover sheet of 14 Ga was only big enough for 34". So I scaled it in Inkscape all combined and this reduced the can opening down to 2-13/16" when cut with no offset. When I cut it the center line group cut from start to end and back to start without lifting the torch so I corrected ths in this attached file. :lol:
20CanHolder.svg
DSCN3290.JPG

You currently do not have access to download this file.
To gain download access for DXF, SVG & other files Click Here

DIY 4X4 Plasma/Router Table
Hypertherm PM65 Machine Torch
Drag Knife and Scribe
Miller Mig welder
13" metal lathe
Small Mill
Everlast PowerTig 255 EXT
bhf
1/2 Star Member
1/2 Star Member
Posts: 3
Joined: Sat Sep 18, 2021 1:54 pm

Re: 20 Can spray bomb wall mount

Post by bhf »

The expanded paint can holder wasn't quite 16" on center, so I moved the outside mounting holes in. This should be 16" on center now.
Untitled.png

You currently do not have access to download this file.
To gain download access for DXF, SVG & other files Click Here

adbuch
6 Star Elite Contributing Member
6 Star Elite Contributing Member
Posts: 8602
Joined: Thu Sep 21, 2017 5:22 pm
Location: Tucson, Arizona
Contact:

Re: 20 Can spray bomb wall mount

Post by adbuch »

I wasn't quite sure what you meant, but now I see - you moved the holes for mounting to wall studs that are located 16" OC.
Thanks,
David
16 inch OC.jpg

You currently do not have access to download this file.
To gain download access for DXF, SVG & other files Click Here

adbuch
6 Star Elite Contributing Member
6 Star Elite Contributing Member
Posts: 8602
Joined: Thu Sep 21, 2017 5:22 pm
Location: Tucson, Arizona
Contact:

Re: 20 Can spray bomb wall mount

Post by adbuch »

acourtjester wrote: Wed Oct 17, 2018 4:45 pm I cut the 20 can holder after I modified the file slightly. I wanted to hang it on the inside of my shop side door, and the leftover sheet of 14 Ga was only big enough for 34". So I scaled it in Inkscape all combined and this reduced the can opening down to 2-13/16" when cut with no offset. When I cut it the center line group cut from start to end and back to start without lifting the torch so I corrected ths in this attached file. :lol:
20CanHolder.svg
DSCN3290.JPG
:Like :Like :Like :Like :Like
Unfortunately for me, I would need very many of these to hold all my spray cans - and then of course wall space to mount them. But a great looking holder and I really like the color.
David
User avatar
Double S Farms
1.5 Star Member
1.5 Star Member
Posts: 29
Joined: Tue Aug 13, 2019 4:34 pm

Re: 20 Can spray bomb wall mount

Post by Double S Farms »

Very nice - thanks for the fine file!
Post Reply

Return to “DXF & SVG Plasma Cutting File Sharing Forum”