Tree of Life Windspinner 16X16

[coggan224]

Tree of Life Windspinner 16X16

Tree of life curly Spinner.dxf

[Bucket8577]

Thanks for the file. I think I may cut it for the wife.

[Rex]

Thanks for sharing

[sphurley]

Thanks. I think it needs some tweaking to add non cut areas for the bends.

[Bucket8577]

So everyone can see it.

[acourtjester]

as sphurley said there needs to be some bridge between rings to connect them, this file will cut a bunch of rings

[N8inWV]

Looks nice! What do you mount this on to make it spin?

[ETCWeld]

Tree of Life Windspinner 16X16


Tree of life curly Spinner.dxf

[akirk1978]

here is an updated version that should keep the rings from falling out, haven't had a chance to cut it yet but it should work if anyone else tries it first let me know if something needs changed.

Tree of life curly.svg

Tree of life curly.dxf

Tree of life curly Spinner final.png

[cstroke]

Looks great. I've used fishing swivels with heavy spider wire(fishing line) in the past.
Thanks for the file.
Chris

[Metal Bison]

Very nice!

[coggan224]

Hmm. Before I uploaded it had the dividers. I never have any luck converting files. Great job.

[akirk1978]

Hmm. Before I uploaded it had the dividers. I never have any luck converting files. Great job.

I just manipulated your original file to make it cut for me, thank you for the amazing original file!!

[weldguy]

I just manipulated your original file to make it cut for me, thank you for the amazing original file!!

Thanks for the share and the edits everyone. Great design

[MrsSavage]

What type of metal did you use in this picture? Does it have a finish? Beautiful work and smooth cut. Thank you for sharing.

here is an updated version that should keep the rings from falling out, haven't had a chance to cut it yet but it should work if anyone else tries it first let me know if something needs changed.Tree of life curly.svgTree of life curly.dxfTree of life curly Spinner final.png

[akirk1978]

What type of metal did you use in this picture? Does it have a finish? Beautiful work and smooth cut. Thank you for sharing.

here is an updated version that should keep the rings from falling out, haven't had a chance to cut it yet but it should work if anyone else tries it first let me know if something needs changed.Tree of life curly.svgTree of life curly.dxfTree of life curly Spinner final.png

That was just a computer generated render of the .dxf file to show what it could look like, what I used to get that look was a sample image of brushed stainless steel though.

[bold designs]

Love the design! How do you bend the design for hanging?

[patrog]

This is awesome! I love cutting wind spinners and will most definitely do this one!

[zoeconner]

Anyone have any tips on bending one lol?

[harrymorley]

i lay em out flat in my lap and starting with the outside , just bend it uo up to about 140 degrees. Continue with remaining rings. flip it over, do other side. takes maybe 2 mins , including final spacing. easy to do , and end result is great. I have a local company laser cut spinner part and I weld in my own designs in center. makes great looking spinners

[mayper]

Thanks for sharing,
Peter

[patrog]

To bend those. Hold the top with one hand and the bottom against your stomach securely. Now use your other hand and grasp the middle section. Give it a twist and both sides will twist evenly. Takes a few seconds this way. There are also some videos online on how to do this.

[cetane]

awsome, what gauge do you guys use?

[Rex]

Works good for me in 16 Ga

[cetane]

Awsome thanks for the file. IT made a cool gift. painted it with automotive candy paint and hs clear.