No wheelchairs needed in heaven

Share, browse, & download dxf, svg, or other vector based designs. If you take be sure to give back.
User avatar
ben de lappe
4 Star Elite Contributing Member
4 Star Elite Contributing Member
Posts: 1234
Joined: Mon Aug 03, 2009 9:37 am
Location: North Mississippi

Re: No wheelchairs needed in heaven

Post by ben de lappe »

cstroke wrote: Sun Sep 08, 2019 8:09 am I cut this out and will post a few pics when it's back from powdercoating, they chose a granite grey.
I think the customer will be very happy, I have no connection to the family but the image pulls at the old heart strings.
Thanks again Ben.
Most welcome cstroke. :Yay I look forward to seeing it and I'm pleased to see something I worked on be found suitable and fitting to a family that's grieving and hope therein some small measure of comfort provided.
slewis64
2.5 Star Member
2.5 Star Member
Posts: 112
Joined: Wed Oct 07, 2015 4:33 pm

Re: No wheelchairs needed in heaven

Post by slewis64 »

thank you so special !
User avatar
ben de lappe
4 Star Elite Contributing Member
4 Star Elite Contributing Member
Posts: 1234
Joined: Mon Aug 03, 2009 9:37 am
Location: North Mississippi

Re: No wheelchairs needed in heaven

Post by ben de lappe »

slewis64 wrote: Sun Sep 08, 2019 5:07 pm thank you so special !
Welcome! :Yay
liv2speed05
2.5 Star Member
2.5 Star Member
Posts: 122
Joined: Fri Oct 21, 2016 10:41 pm

Re: No wheelchairs needed in heaven

Post by liv2speed05 »

Great job, Ben, as always! Whether it is a young child or an adult, it is very touching to think of this and see this.
User avatar
ben de lappe
4 Star Elite Contributing Member
4 Star Elite Contributing Member
Posts: 1234
Joined: Mon Aug 03, 2009 9:37 am
Location: North Mississippi

Re: No wheelchairs needed in heaven

Post by ben de lappe »

liv2speed05 wrote: Tue Sep 17, 2019 8:04 pm Great job, Ben, as always! Whether it is a young child or an adult, it is very touching to think of this and see this.
Much appreciated!
And that's exactly why I did it. :Yay
User avatar
Larry83301
5 Star Elite Contributing Member
5 Star Elite Contributing Member
Posts: 2647
Joined: Tue Oct 27, 2009 6:36 pm
Location: Twin Falls, Idaho

Re: No wheelchairs needed in heaven

Post by Larry83301 »

Finally finished cutting my version of it and hung it up. Texted my daughter and told her I had something for her, but she hasn't seen it yet. Here's a pic of the finished piece, thanks to Ben I could make one. Picture is a little fuzzy, it's that or I get shine all over the front
NO WHEELCHAIRS -1.jpg

Larry

You currently do not have access to download this file.
To gain download access for DXF, SVG & other files Click Here

DXF
4.5 Star Elite Contributing Member
4.5 Star Elite Contributing Member
Posts: 1649
Joined: Tue Feb 22, 2011 5:15 pm
Location: Mountain City, Tennessee

Re: No wheelchairs needed in heaven

Post by DXF »

Larry83301 wrote: Wed Sep 18, 2019 3:07 pm Finally finished cutting my version of it and hung it up. Texted my daughter and told her I had something for her, but she hasn't seen it yet. Here's a pic of the finished piece, thanks to Ben I could make one. Picture is a little fuzzy, it's that or I get shine all over the front

NO WHEELCHAIRS -1.jpg


Larry
:Like Real nice!

Dave Hanks
User avatar
ben de lappe
4 Star Elite Contributing Member
4 Star Elite Contributing Member
Posts: 1234
Joined: Mon Aug 03, 2009 9:37 am
Location: North Mississippi

Re: No wheelchairs needed in heaven

Post by ben de lappe »

Very nice Larry! Glad to assist and sure she'll love it.
User avatar
Larry83301
5 Star Elite Contributing Member
5 Star Elite Contributing Member
Posts: 2647
Joined: Tue Oct 27, 2009 6:36 pm
Location: Twin Falls, Idaho

Re: No wheelchairs needed in heaven

Post by Larry83301 »

ben de lappe wrote: Wed Sep 18, 2019 9:24 pm Very nice Larry! Glad to assist and sure she'll love it.
Gave it to her yesterday ( she cried) and she loved it. Thanks Ben for the inspiration and the file to get me started. :Yay


Larry
User avatar
ben de lappe
4 Star Elite Contributing Member
4 Star Elite Contributing Member
Posts: 1234
Joined: Mon Aug 03, 2009 9:37 am
Location: North Mississippi

Re: No wheelchairs needed in heaven

Post by ben de lappe »

Awesome Larry, what it's all about and you're very welcome. I'm just thankful I have the ability to provide both.
User avatar
cstroke
3 Star Elite Contributing Member
3 Star Elite Contributing Member
Posts: 405
Joined: Thu May 24, 2012 7:45 pm

Re: No wheelchairs needed in heaven

Post by cstroke »

ChairHeaven.PNG
As promised but sorry for the delay.
We will see if this works, tried using my old photobucket account and I had nothing but issues. Spent lots of time uploading to a google drive account.

You currently do not have access to download this file.
To gain download access for DXF, SVG & other files Click Here

6’x12’ Dynatorch powermax 85
12’ Wysong brake
5’x 5/16’ wysong rolls
3.8’x10’ shear
65 Ton ironworker
Boss laser 3655 150 watt CO2.
SFX 100watt Mopa
Quicncy 7.5hp
Square wave tig, Multimatics, Miller bobcat efi.
User avatar
Larry83301
5 Star Elite Contributing Member
5 Star Elite Contributing Member
Posts: 2647
Joined: Tue Oct 27, 2009 6:36 pm
Location: Twin Falls, Idaho

Re: No wheelchairs needed in heaven

Post by Larry83301 »

cstroke wrote: Tue Oct 22, 2019 4:16 pm
As promised but sorry for the delay.
We will see if this works, tried using my old photobucket account and I had nothing but issues. Spent lots of time uploading to a google drive account.
Why not just post pics here??
Go down below the Quick Reply and click on "Full Editor and Preview" After you get there you will see "two tabs under the large text box, the are "Options" and "Attachments" Click the attachments tab, that will take you to another tab that says "Add files" click that. You then have a typical add files box like most online sites have for you to select the place to find your file and add it to the file name bar in the lower line. When you have selected your file click "OPEN" and you will come back to your posting, if thee file type is one of the type that can be posted and the file size is not to large it will be loaded to a staging line. Then all you need to do is select a spot in your post where you want to place the file,( I make a new line at that point by hitting RETURN) click there and then move your pointer down to the line where your file is listed and click "Place inline". At that point you can either add more things to your post or do one of the three options just below your post. I like to preview my posts but that's your choice. When you are done make sure you click on POST so the rest of us can see what you have :Yay :Yay :Yay


Larry

P.S. You can use paint to make the file size smaller so they don't take up a bunch of room.
P.P.S. All I see of the picture you posted is a circle with a dash inside it.
User avatar
ben de lappe
4 Star Elite Contributing Member
4 Star Elite Contributing Member
Posts: 1234
Joined: Mon Aug 03, 2009 9:37 am
Location: North Mississippi

Re: No wheelchairs needed in heaven

Post by ben de lappe »

Clicking the link provided sent me to this.....
Image
Looks great, no worries with delays.Glad I could assist and I thank you for sharing this pic.
User avatar
Larry83301
5 Star Elite Contributing Member
5 Star Elite Contributing Member
Posts: 2647
Joined: Tue Oct 27, 2009 6:36 pm
Location: Twin Falls, Idaho

Re: No wheelchairs needed in heaven

Post by Larry83301 »

Very nice picture, looks great with all the flowers.


Larry
TWIZTED181
1.5 Star Member
1.5 Star Member
Posts: 29
Joined: Fri Aug 07, 2015 6:09 pm

Re: No wheelchairs needed in heaven

Post by TWIZTED181 »

thanks Ben nice work as always
User avatar
ben de lappe
4 Star Elite Contributing Member
4 Star Elite Contributing Member
Posts: 1234
Joined: Mon Aug 03, 2009 9:37 am
Location: North Mississippi

Re: No wheelchairs needed in heaven

Post by ben de lappe »

TWIZTED181 wrote: Wed Nov 06, 2019 4:55 pm thanks Ben nice work as always
Anytime buddy and thank you. I know you'll put it to good use. :Like
Post Reply

Return to “DXF & SVG Plasma Cutting File Sharing Forum”