"5 O-Clock" clock

Share, browse, & download dxf, svg, or other vector based designs. If you take be sure to give back.
Post Reply
User avatar
gblaylo
2 Star Member
2 Star Member
Posts: 70
Joined: Sat Jan 17, 2015 6:48 pm
Location: Selma, AL

"5 O-Clock" clock

Post by gblaylo »

This is a clock I built for myself back when I retired this past August. The numbers and lettering I left unfinished to rust so that they would match the old lumber of the background which is fence boards which a neighbor had taken down. I glued these to a piece of 7/16 OSD decking board for support and cut a pocket out in back for the clock movement. The hands and movement were purchased from Hobby Lobby. File is attached if anyone wants to build their own. You can change or delete the River part. The file includes the drill locations for the number and letter attachment pilot holes for those which have a CNC router.
RIVER CLOCK.zip
Image

You currently do not have access to download this file.
To gain download access for DXF, SVG & other files Click Here

User avatar
acourtjester
6 Star Elite Contributing Member
6 Star Elite Contributing Member
Posts: 7770
Joined: Sat Jun 02, 2012 6:04 pm
Location: Pensacola, Fla

Re: "5 O-Clock" clock

Post by acourtjester »

Thanks for post I'm sure it will get downloaded
DIY 4X4 Plasma/Router Table
Hypertherm PM65 Machine Torch
Drag Knife and Scribe
Miller Mig welder
13" metal lathe
Small Mill
Everlast PowerTig 255 EXT
plasmanewbie
4.5 Star Elite Contributing Member
4.5 Star Elite Contributing Member
Posts: 2567
Joined: Thu Jul 24, 2008 11:15 am

Re: "5 O-Clock" clock

Post by plasmanewbie »

Very nice!!!! Thanks for sharing the file.
dlewis69
1/2 Star Member
1/2 Star Member
Posts: 8
Joined: Sun Jun 27, 2021 9:20 am

Re: "5 O-Clock" clock

Post by dlewis69 »

Very cool! Thanks!
Post Reply

Return to “DXF & SVG Plasma Cutting File Sharing Forum”