Hypertherm 380

Hypertherm Plasma Cutter discussion forum.
Post Reply
brandon1566
1 Star Member
1 Star Member
Posts: 16
Joined: Mon Sep 30, 2019 4:22 pm

Hypertherm 380

Post by brandon1566 »

Can a Hypertherm 380 be used for a plasma table? I purchased a Premier Plasma table recently Im curious if my current machine will work on it. Thanks
brandon1566
1 Star Member
1 Star Member
Posts: 16
Joined: Mon Sep 30, 2019 4:22 pm

Re: Hypertherm 380

Post by brandon1566 »

I found the search button :D, with that said does anyone have a Diagram for the splicing needed in order to run the machine?
weldguy
4 Star Elite Contributing Member
4 Star Elite Contributing Member
Posts: 1929
Joined: Fri Apr 17, 2009 11:48 am

Re: Hypertherm 380

Post by weldguy »

Don't have a diagram for you but the hook up will be very simple. Does your plasma table have a THC system? If so will it work off RAW arc voltage?
robertspark
4.5 Star Elite Contributing Member
4.5 Star Elite Contributing Member
Posts: 1809
Joined: Mon Jun 12, 2017 6:43 pm

Re: Hypertherm 380

Post by robertspark »

brandon1566 wrote: Wed Oct 23, 2019 10:36 am Can a Hypertherm 380 be used for a plasma table? I purchased a Premier Plasma table recently Im curious if my current machine will work on it. Thanks


yes,

connect the THC to the raw voltage input.... make sure your THC can accept raw voltage though

check your polarity!!!!

service manual here

https://www.hypertherm.com/Download?fil ... &zip=False
Post Reply

Return to “Hypertherm Plasma Cutters”