Hypertherm Powermax 65 Fine Cut 45amp consumables

Hypertherm Plasma Cutter discussion forum.
Post Reply
Gator
1/2 Star Member
1/2 Star Member
Posts: 1
Joined: Thu Aug 20, 2020 8:20 am

Hypertherm Powermax 65 Fine Cut 45amp consumables

Post by Gator »

I have a Hypertherm Powermax 65 with the duramax machine torch(non Ohmic retaining cap). When using the fine cut consumables the manual shows two different set ups one with a shield one with a deflector. When I called hypertherm they stated that the 220948 shield can be used on either retaining cap. Does anyone have some in site into this? Thanks.
weldguy
4 Star Elite Contributing Member
4 Star Elite Contributing Member
Posts: 1928
Joined: Fri Apr 17, 2009 11:48 am

Re: Hypertherm Powermax 65 Fine Cut 45amp consumables

Post by weldguy »

Sure that shield will fit and work on either cap. I don't use ohmic sensing so I prefer to use the deflector 220955 so I can see the nozzle when I am using finecuts.
Post Reply

Return to “Hypertherm Plasma Cutters”