Plug amperage recommended for powermax 65

Hypertherm Plasma Cutter discussion forum.
Post Reply
Dabbreath
1/2 Star Member
1/2 Star Member
Posts: 3
Joined: Wed Dec 29, 2021 7:55 pm

Plug amperage recommended for powermax 65

Post by Dabbreath »

Just got my CNBC plasma table and my powermax 65 don’t have a plug. so my question is what amp plug is recommended to hook up. Is there a certain style that’s recommended? I will be hooking unit up as 1-phase 220v thanks for the help.
User avatar
SegoMan DeSigns
3.5 Star Elite Contributing Member
3.5 Star Elite Contributing Member
Posts: 822
Joined: Sat Jan 06, 2018 4:45 pm

Re: Plug amperage recommended for powermax 65

Post by SegoMan DeSigns »

I use the NEMA 14-50 P&R (P=Plug, R=Receptacle) system for my 1250 & 65 and all of my other welders with no problems This is basically a 4 pole range plug.
Dabbreath
1/2 Star Member
1/2 Star Member
Posts: 3
Joined: Wed Dec 29, 2021 7:55 pm

Re: Plug amperage recommended for powermax 65

Post by Dabbreath »

Segoman is there a single phase 3prong plug that u know of that I could use
User avatar
djreiswig
4.5 Star Elite Contributing Member
4.5 Star Elite Contributing Member
Posts: 1929
Joined: Thu Nov 19, 2015 10:02 pm
Location: SE Nebraska

Re: Plug amperage recommended for powermax 65

Post by djreiswig »

We just use one of these.
Screenshot_20211230-092327.png
2014 Bulltear (StarLab) 4x8
C&CNC EtherCut
Mach3, SheetCam, Draftsight
Hypertherm PM65
Oxy/Acetylene Flame Torch
Pneumatic Plate Marker, Ohmic, 10 inch Rotary Chuck (in progress)
Dabbreath
1/2 Star Member
1/2 Star Member
Posts: 3
Joined: Wed Dec 29, 2021 7:55 pm

Re: Plug amperage recommended for powermax 65

Post by Dabbreath »

Got it thanks again u was more help then the few electricians I talked to
User avatar
SegoMan DeSigns
3.5 Star Elite Contributing Member
3.5 Star Elite Contributing Member
Posts: 822
Joined: Sat Jan 06, 2018 4:45 pm

Re: Plug amperage recommended for powermax 65

Post by SegoMan DeSigns »

Lowe's and Homer has those as well
adbuch
6 Star Elite Contributing Member
6 Star Elite Contributing Member
Posts: 8599
Joined: Thu Sep 21, 2017 5:22 pm
Location: Tucson, Arizona
Contact:

Re: Plug amperage recommended for powermax 65

Post by adbuch »

djreiswig wrote: Thu Dec 30, 2021 10:24 am We just use one of these.
Screenshot_20211230-092327.png
:Like :Like :Like :Like :Like
Post Reply

Return to “Hypertherm Plasma Cutters”