Hypertherm 105A and THC Voltage Divider Ratio Issues

Hypertherm Plasma Cutter discussion forum.
Post Reply
Crich
1/2 Star Member
1/2 Star Member
Posts: 1
Joined: Sat Jul 09, 2022 3:30 am

Hypertherm 105A and THC Voltage Divider Ratio Issues

Post by Crich »

Hi. We're having a problem on connecting the Hypertherm 105A to torch height controller HYD XPTHC-100III.

In Hypertherm 105A we set the ratio to 50:1, while our thc have a fixed voltage divider ratio of 100:1.

What can we do about this?
HypHyDef
2.5 Star Member
2.5 Star Member
Posts: 126
Joined: Wed Jun 30, 2021 8:21 am

Re: Hypertherm 105A and THC Voltage Divider Ratio Issues

Post by HypHyDef »

Hi Crich, Please contact our Technical Support team here at Hypertherm for help getting your Powermax 105 to your THC. you can reach them here:
(800) 643-9878 or https://www.hypertherm.com/en-US/contac ... -questions
Randy,
Marketing Data Specialist – Americas Region
Hypertherm Inc.
adbuch
6 Star Elite Contributing Member
6 Star Elite Contributing Member
Posts: 8602
Joined: Thu Sep 21, 2017 5:22 pm
Location: Tucson, Arizona
Contact:

Re: Hypertherm 105A and THC Voltage Divider Ratio Issues

Post by adbuch »

Crich wrote: Sat Jul 09, 2022 3:44 am Hi. We're having a problem on connecting the Hypertherm 105A to torch height controller HYD XPTHC-100III.

In Hypertherm 105A we set the ratio to 50:1, while our thc have a fixed voltage divider ratio of 100:1.

What can we do about this?
Crich - If your 105A does not have the option to set the ratio to 100:1, then you can simply add a 2:1 divider to step down your divided arc voltage to the correct compatible level to match your thc.
David
Post Reply

Return to “Hypertherm Plasma Cutters”