Anyone know if a machine torch from a HP45 will work on an HP65.
Does an HP65 have the same connections as the HP45 for CNC Interface?
TIA
-
-
Weekly Free DXF Design
-
Download DXF/SVG
Machine Torch Matchup 45 to 65
-
tnbndr
- 4.5 Star Elite Contributing Member
- Posts: 1716
- Joined: Mon Jan 09, 2012 4:30 pm
- Location: New Berlin, WI
- Contact:
Machine Torch Matchup 45 to 65
Dennis
ComMarker B6 Galvo MOPA Fiber Laser
Hypertherm PM30 Hand Torch
RolAir 3HP Single Stage 30 Gal
13.8scfm@100psi, 3450RPM
Miller 215 MultiMatic
RW 390E Slip Roll (Powered)
AutoCAD, SheetCAM, Mach 3, Lightburn
ComMarker B6 Galvo MOPA Fiber Laser
Hypertherm PM30 Hand Torch
RolAir 3HP Single Stage 30 Gal
13.8scfm@100psi, 3450RPM
Miller 215 MultiMatic
RW 390E Slip Roll (Powered)
AutoCAD, SheetCAM, Mach 3, Lightburn
-
rdj357
- 4 Star Elite Contributing Member
- Posts: 1186
- Joined: Sun Mar 11, 2012 4:40 pm
- Location: Tahlequah, OK
Re: Machine Torch Matchup
Hi Dennis - the original T45M torch will not work on the Powermax 65. However if a Duramax torch was purchased for use on the old Powermax 45 then it would work on either machine.
The CPC connection on the PM45 has a preset divided arc voltage of 50:1 - the PM65 will have (or require a kit for) an internal divider that is adjustable. If you use the 50:1 currently or just use the trigger/start-stop circuits then it will come factory default to that arc voltage.
The CPC connection on the PM45 has a preset divided arc voltage of 50:1 - the PM65 will have (or require a kit for) an internal divider that is adjustable. If you use the 50:1 currently or just use the trigger/start-stop circuits then it will come factory default to that arc voltage.
Robert Johnson
PlasmaCAM GURU & Instructor
I am not affiliated with PlasmaCAM, Inc. in any way. I offer training on their equipment and software. All product and company names are trademarks™ or registered® trademarks of their respective holders. Use of them are for nominative purposes only and does not imply any affiliation with or endorsement by them.
PlasmaCAM GURU & Instructor
I am not affiliated with PlasmaCAM, Inc. in any way. I offer training on their equipment and software. All product and company names are trademarks™ or registered® trademarks of their respective holders. Use of them are for nominative purposes only and does not imply any affiliation with or endorsement by them.
