Anyone know if a machine torch from a HP45 will work on an HP65.
Does an HP65 have the same connections as the HP45 for CNC Interface?
TIA
Machine Torch Matchup 45 to 65
- tnbndr
- 4.5 Star Elite Contributing Member
- Posts: 1670
- Joined: Mon Jan 09, 2012 4:30 pm
- Location: New Berlin, WI
- Contact:
Machine Torch Matchup 45 to 65
Dennis
LDR 4x8, Scribe, DTHCIV
Hypertherm PM45, Macair Dryer
DeVilbiss Air America 6.5HP, 80Gal., 175psi, Two Stage
16.9scfm@100psi, 16.0scfm@175psi
Miller 215 MultiMatic
RW 390E Slip Roll (Powered)
AutoCAD, SheetCAM, Mach 3
http://ikescreations.com
LDR 4x8, Scribe, DTHCIV
Hypertherm PM45, Macair Dryer
DeVilbiss Air America 6.5HP, 80Gal., 175psi, Two Stage
16.9scfm@100psi, 16.0scfm@175psi
Miller 215 MultiMatic
RW 390E Slip Roll (Powered)
AutoCAD, SheetCAM, Mach 3
http://ikescreations.com
- rdj357
- 4 Star Elite Contributing Member
- Posts: 1167
- Joined: Sun Mar 11, 2012 4:40 pm
- Location: Tahlequah, OK
- Contact:
Re: Machine Torch Matchup
Hi Dennis - the original T45M torch will not work on the Powermax 65. However if a Duramax torch was purchased for use on the old Powermax 45 then it would work on either machine.
The CPC connection on the PM45 has a preset divided arc voltage of 50:1 - the PM65 will have (or require a kit for) an internal divider that is adjustable. If you use the 50:1 currently or just use the trigger/start-stop circuits then it will come factory default to that arc voltage.
The CPC connection on the PM45 has a preset divided arc voltage of 50:1 - the PM65 will have (or require a kit for) an internal divider that is adjustable. If you use the 50:1 currently or just use the trigger/start-stop circuits then it will come factory default to that arc voltage.
Robert Johnson
----- PlasmaCam 5x10 Table -----
FourNinety Creations & Learn PC, LLC
Plasmacam Goodies! Snap'NCut Mount, AXXON Cards/Cables, Maintenance Items
Learn Plasmacam Workshops
Learn Plasmacam on Facebook
Learn Plasmacam on YouTube
----- PlasmaCam 5x10 Table -----
FourNinety Creations & Learn PC, LLC
Plasmacam Goodies! Snap'NCut Mount, AXXON Cards/Cables, Maintenance Items
Learn Plasmacam Workshops
Learn Plasmacam on Facebook
Learn Plasmacam on YouTube