Plasmacam 2007model, super deal, but no upgrades?

PlasmaCam Hardware discussion forum
Post Reply
User avatar
Complete_Loser
2.5 Star Member
2.5 Star Member
Posts: 129
Joined: Sat Dec 26, 2009 1:10 pm
Location: Indiana (central)

Plasmacam 2007model, super deal, but no upgrades?

Post by Complete_Loser »

I found a plasmacam forsale very nearby, at a great deal.

The software cd says 2008 (dont recall version, 2.03 or something like that)
the DHC isnt DHC2.
comes with laptop and Hypertherm 1000 G3.

A friend of mine has v3.11 if i can use it on this one. So I dont think that would be a problem.

My question is, what all would it cost me to install any of the other upgrades?

I know about the 'transfer of ownership' stuff. He's the 2nd owner, so he is looking into clearing that up with the original.

Mechanically, its a sound machine.
You want it done cheap and fast, it wont be right.
You want it done right and fast, it wont be cheap.

You want it done right and cheap.., come back in a year..
User avatar
djreiswig
4.5 Star Elite Contributing Member
4.5 Star Elite Contributing Member
Posts: 1929
Joined: Thu Nov 19, 2015 10:02 pm
Location: SE Nebraska

Re: Plasmacam 2007model, super deal, but no upgrades?

Post by djreiswig »

There are a few posts in the plasmacam section that have the info you're searching for. Have a look around or try the search.
Here's just one.
viewtopic.php?f=61&t=31453
2014 Bulltear (StarLab) 4x8
C&CNC EtherCut
Mach3, SheetCam, Draftsight
Hypertherm PM65
Oxy/Acetylene Flame Torch
Pneumatic Plate Marker, Ohmic, 10 inch Rotary Chuck (in progress)
adbuch
6 Star Elite Contributing Member
6 Star Elite Contributing Member
Posts: 8598
Joined: Thu Sep 21, 2017 5:22 pm
Location: Tucson, Arizona
Contact:

Re: Plasmacam 2007model, super deal, but no upgrades?

Post by adbuch »

Complete_Loser wrote: Mon Dec 06, 2021 9:10 pm
My question is, what all would it cost me to install any of the other upgrades?

Are you asking about mechanical upgrades or software?
David
adbuch
6 Star Elite Contributing Member
6 Star Elite Contributing Member
Posts: 8598
Joined: Thu Sep 21, 2017 5:22 pm
Location: Tucson, Arizona
Contact:

Re: Plasmacam 2007model, super deal, but no upgrades?

Post by adbuch »

adbuch wrote: Mon Dec 06, 2021 10:28 pm
Complete_Loser wrote: Mon Dec 06, 2021 9:10 pm
My question is, what all would it cost me to install any of the other upgrades?

Are you asking about mechanical upgrades or software?
David
OK. I see you have created a new post with your specific questions. Linked to below.
David

viewtopic.php?f=61&p=203372#p203372
Post Reply

Return to “PlasmaCam, Samson, & Go Torch Forum”