Side Grate Cover for a Samson 510?

PlasmaCam Hardware discussion forum
Post Reply
CCR Custom Metals
1/2 Star Member
1/2 Star Member
Posts: 9
Joined: Tue Dec 08, 2015 10:31 am

Side Grate Cover for a Samson 510?

Post by CCR Custom Metals »

I have seen someone in the past with a design for the edges of the table, over the ends of the grates to help seal the table up to increase vacuum. Does anyone have a file for that?
Inked245267381_256762159610757_5629620073248589007_n_LI.jpg

You currently do not have access to download this file.
To gain download access for DXF, SVG & other files Click Here

adbuch
6 Star Elite Contributing Member
6 Star Elite Contributing Member
Posts: 8599
Joined: Thu Sep 21, 2017 5:22 pm
Location: Tucson, Arizona
Contact:

Re: Side Grate Cover for a Samson 510?

Post by adbuch »

I have no cut files or drawings, but this is what you are looking for. I made cardboard template, transferred to 22 ga. steel, and used shear and brake to fabricate them. Very easy to do.
David



More photos here:
https://photos.app.goo.gl/h8LHufi6frttfGNQA
20170719_215934.jpg

You currently do not have access to download this file.
To gain download access for DXF, SVG & other files Click Here

adbuch
6 Star Elite Contributing Member
6 Star Elite Contributing Member
Posts: 8599
Joined: Thu Sep 21, 2017 5:22 pm
Location: Tucson, Arizona
Contact:

Re: Side Grate Cover for a Samson 510?

Post by adbuch »

CCR Custom Metals wrote: Sat Sep 03, 2016 2:46 am Do you happen to have this in closed paths and not cut paths?
pumpkin.dxf
pumpkin.dxf image.jpg

You currently do not have access to download this file.
To gain download access for DXF, SVG & other files Click Here

adbuch
6 Star Elite Contributing Member
6 Star Elite Contributing Member
Posts: 8599
Joined: Thu Sep 21, 2017 5:22 pm
Location: Tucson, Arizona
Contact:

Re: Side Grate Cover for a Samson 510?

Post by adbuch »

CCR Custom Metals wrote: Thu Feb 17, 2022 2:35 pm I have seen someone in the past with a design for the edges of the table, over the ends of the grates to help seal the table up to increase vacuum. Does anyone have a file for that?

Inked245267381_256762159610757_5629620073248589007_n_LI.jpg
Did you ever get these cut and installed? If so, we'd love to see how they turned out.
David
User avatar
Joe Jones
5 Star Elite Contributing Member
5 Star Elite Contributing Member
Posts: 3041
Joined: Sat Oct 11, 2014 2:33 pm
Location: Franklin, KY., USA
Contact:

Re: Side Grate Cover for a Samson 510?

Post by Joe Jones »

In my travels, I have seen variations on this theme...

Joe
EDGE COVERS.jpg

You currently do not have access to download this file.
To gain download access for DXF, SVG & other files Click Here

Franklin, KY., USA
Samson 510 & 4x4
6” Z Rail Lift Kit for PlasmaCam
CreatBot D600 PRO 3D Printer
12 Lasers
FREE DesignEdge Training!

It is more fun when it isn't necessary!
Post Reply

Return to “PlasmaCam, Samson, & Go Torch Forum”