windows 8 and plasmacam 3.11

PlasmaCam Hardware discussion forum
Post Reply
jjweldfab5238
1 Star Member
1 Star Member
Posts: 13
Joined: Wed Dec 18, 2019 9:53 am
Location: mass
Contact:

windows 8 and plasmacam 3.11

Post by jjweldfab5238 »

Hello all,
I've been running plasma cam 3.11 off of windows 7 i believe and my desktop has finally decided to update to windows 8, the program will no longer open. are there any solutions to this? or am i stuck having to update my software to design edge? plasma cam will not assist me with anything due to the fact that the original owner passed away so he cannot transfer ownership.
any help or advice is greatly appreciated
- James, J&J welding LLC
User avatar
djreiswig
4.5 Star Elite Contributing Member
4.5 Star Elite Contributing Member
Posts: 1929
Joined: Thu Nov 19, 2015 10:02 pm
Location: SE Nebraska

Re: windows 8 and plasmacam 3.11

Post by djreiswig »

Maybe you can downgrade. I have installed a program on my computer that blocks it from upgrading automatically.
https://windowsreport.com/downgrade-win ... windows-7/
Screenshot_20220712-212911.png

You currently do not have access to download this file.
To gain download access for DXF, SVG & other files Click Here

2014 Bulltear (StarLab) 4x8
C&CNC EtherCut
Mach3, SheetCam, Draftsight
Hypertherm PM65
Oxy/Acetylene Flame Torch
Pneumatic Plate Marker, Ohmic, 10 inch Rotary Chuck (in progress)
weldguy
4 Star Elite Contributing Member
4 Star Elite Contributing Member
Posts: 1929
Joined: Fri Apr 17, 2009 11:48 am

Re: windows 8 and plasmacam 3.11

Post by weldguy »

With Windows 8 you may be able to do a system restore to an earlier date. Restore to the last know date it was working and then disconnect your tables PC from the internet for good.
Post Reply

Return to “PlasmaCam, Samson, & Go Torch Forum”