Headed to CommieFornia soon

[Joe Jones]

I am taking this route to CommieFornia very soon. I will carry four of my six-inch rail lift kits for the PlasmaCam and Samson 510 tables with me, in case someone along the route wants one at a "Dewdrop INN" price with NO SHIPPING charges! You can still use the table as normal, but if you HAVE or BUY the $998.00 (CSB) Customizable Size Upgrade directly from PlasmaCam for your DesignEdge software license, then you will be able to take full advantage of the six inches of Z travel, and a whole new world of possibilities will open up for you!

I will also post the return trip below (soon) which will happen probably in the first or second week of February. It will be slightly different. Send me an email with any questions - addmenow (at) mail (dot) com

Joe

KY CA RUN.jpg

[Joe Jones]

Returning to Kentucky in the first or second week of February, unless plans change.

Joe

CA KY RUN.jpg

[Joe Jones]

One kit is spoken for in New Mexico. Three still traveling with me.

Joe

[Joe Jones]

I am in Sun City, AZ. at the moment. I will leave for the Los Angeles area tomorrow, where I will remain for several days. I have things to do and people to see. I have three rail lift kits with me now.

Joe

[cutnweld]

Where is CommieFornia?

[N2 Welding]

Where is CommieFornia?

Right next door to naughtyvada and south of Notagaindia.

[Joe Jones]

Redondo beach and San Diego

[cutnweld]

I am from Canada so not to familiar with all the state names. I learned them all in school tho and even had to write them all out by memory in a test. As I recall it was spelled California. I guess the new woke learning atmosphere does not require folks to learn how to spell

[Joe Jones]

I know how to spell. And COMMIEfornia is exactly correct!

Joe

[rdj357]

I am from Canada so not to familiar with all the state names. I learned them all in school tho and even had to write them all out by memory in a test. As I recall it was spelled California. I guess the new woke learning atmosphere does not require folks to learn how to spell

You are correct. People trying to be covertly and fully unnecessarily political on plasma cutting forums like to play childish games with spelling of various things.

[Joe Jones]

Nice try, but FAIL!

I am not politicizing anything. Anyone with a BRAIN knows that COMMIEfornia is the correct spelling for that stinking cesspool of Communism. The term is not applicable to any individual merely because he or she is a subject who lives there, either by choice or by circumstance. To imply that COMMIEfornia is no different than other States is ludicrous.

Joe

[N2 Welding]

Joe, you are simply a little ray to of sunshine on a stormy day. Keep up the good work, we all can use a little more joy and some posative words of encouragement to help us get through our miserable existence.

[Joe Jones]

Hugs, everyone! HUGS!!!

Joe

[robertspark]

what do you see as communist in California?

or are you confusing communism with socialism?

[Joe Jones]

Political discussions can be had via PMs.

Joe

[FabLab]

what do you see as communist in California?

or are you confusing communism with socialism?

[Joe Jones]

Back in Arizona now for a few days before heading to Albuquerque. Then Dallas, Little Rock and the home again.

[Joe Jones]

I just installed a lift kit onto a 4 x 4 table in Albuquerque new Mexico today. Tomorrow I am going to leave the area and head for Dallas Texas. After that I am going to Conroy Arkansas. Then I am returning to my home in Franklin Kentucky. I have two of the four lift kits I brought with me still available. These kits give your table 6 inches of Z travel which you can either use manually, or take full advantage of them by adding the customizable size upgrade to your design edge software which is sold by Plasmacam. Buying the kit from me now means I can swing by your house or shop and help you install the kit while I am there. It will also save you the shipping costs. If you’re interested in one of the two remaining kits and you are anywhere along my route home, contact me to see if I can swing by your place on the way. 2707764042 - Joe

[rdj357]

I'm betting Conway, Arkansas? That's a few hours from me so the name sounded familiar but I'd not heard of it and Google hasn't either.

[Joe Jones]

Yep. Conway AR. Here for one more night, tonight, before heading home.

Joe

[Joe Jones]

The rail lift kit installed onto a DHC2 4x4 table. It works great with the Snap-n-Cut too!

Joe

DAF72643-C91D-457E-8E98-36A178E8CD15.jpeg

2CF66826-CAAD-45B1-9BD8-2E0D1DB4B337.jpeg

31D320BE-1FC3-47E9-8909-388EC55B5B4C.jpeg

[plasmanewbie]

Looks great and even color matched! Nice work Joe.

[Joe Jones]

The $998.00 (CSB) Customizable Size Upgrade is NOT required to use the rail lift kit. However, it is best to add this upgrade to take full advantage of the additional Z height.

Joe