How to wire Hypertherm 85 for Raw arc voltage

Hypertherm Plasma Cutter discussion forum.
Post Reply
tulsajosh
1.5 Star Member
1.5 Star Member
Posts: 42
Joined: Sat May 04, 2019 9:30 pm
Contact:

How to wire Hypertherm 85 for Raw arc voltage

Post by tulsajosh »

Im switching to a large plasma cutter from a cutmaster a40 to a hypertherm powermax 85 but Not sure how to wire in the raw arc voltage. The Cutmaster tell you on the board where the raw arc voltage is but im not seeing anyting in a hypertherm manual to wire a Raw Arc voltage for my height controller. Any help or diagrams would be greatly appreciated.
Spaded Creatives LLC.

Lincoln Torchmate 2 4x8 Watertable
ShopBot 5x10 CNC Router
Miller XMT 304 welder
Miller Suitcase 12Rc
Miller 15a Mig gun
Eastwood Tig 200
Lincoln 140HD welder
Roland GX 24 vinyl cutter
Hyper smooth Powder coater
User avatar
djreiswig
4.5 Star Elite Contributing Member
4.5 Star Elite Contributing Member
Posts: 1929
Joined: Thu Nov 19, 2015 10:02 pm
Location: SE Nebraska

Re: How to wire Hypertherm 85 for Raw arc voltage

Post by djreiswig »

Remove the cover and follow the torch lead and work lead to the board. I'm sure there are pics of the terminals on here somewhere.
Found the bulletin.
https://www.hypertherm.com/Download?fil ... &zip=False
2014 Bulltear (StarLab) 4x8
C&CNC EtherCut
Mach3, SheetCam, Draftsight
Hypertherm PM65
Oxy/Acetylene Flame Torch
Pneumatic Plate Marker, Ohmic, 10 inch Rotary Chuck (in progress)
adbuch
6 Star Elite Contributing Member
6 Star Elite Contributing Member
Posts: 8599
Joined: Thu Sep 21, 2017 5:22 pm
Location: Tucson, Arizona
Contact:

Re: How to wire Hypertherm 85 for Raw arc voltage

Post by adbuch »

powermax 85 arc voltage.jpg
powermax 85 arc voltage.jpg (60.94 KiB) Viewed 347 times
tulsajosh
1.5 Star Member
1.5 Star Member
Posts: 42
Joined: Sat May 04, 2019 9:30 pm
Contact:

Re: How to wire Hypertherm 85 for Raw arc voltage

Post by tulsajosh »

great thank you very much
Spaded Creatives LLC.

Lincoln Torchmate 2 4x8 Watertable
ShopBot 5x10 CNC Router
Miller XMT 304 welder
Miller Suitcase 12Rc
Miller 15a Mig gun
Eastwood Tig 200
Lincoln 140HD welder
Roland GX 24 vinyl cutter
Hyper smooth Powder coater
adbuch
6 Star Elite Contributing Member
6 Star Elite Contributing Member
Posts: 8599
Joined: Thu Sep 21, 2017 5:22 pm
Location: Tucson, Arizona
Contact:

Re: How to wire Hypertherm 85 for Raw arc voltage

Post by adbuch »

tulsajosh wrote: Mon Aug 08, 2022 12:22 pm great thank you very much
:Like :Like :Like
Post Reply

Return to “Hypertherm Plasma Cutters”