Torchmate Blue Screen Torch Height Control

Torchmate Hardware discussion forum
Post Reply
User avatar
Limitless
1.5 Star Member
1.5 Star Member
Posts: 30
Joined: Wed Aug 27, 2014 12:30 pm
Location: Jogues, Ontario, Canada
Contact:

Torchmate Blue Screen Torch Height Control

Post by Limitless »

I have a Torchmate 3 and my Blue Screen Torch Height Control Box just died. I saw a lot of treads about this but I am looking to find a used one for now to keep the business rolling while I can dig deeper to find something to replace it with.

Thanks!

Limitless
sonbakler
3 Star Member
3 Star Member
Posts: 349
Joined: Fri Apr 15, 2011 3:47 am

Re: Torchmate Blue Screen Torch Height Control

Post by sonbakler »

Man that sucks, sorry I can't be of help, hopefully someone can. I believe C&CNC has a retrofit for that. Good luck
tac1fab
1/2 Star Member
1/2 Star Member
Posts: 7
Joined: Fri Nov 01, 2019 2:58 pm

Re: Torchmate Blue Screen Torch Height Control

Post by tac1fab »

I've been having trouble with my height control as well. I've been in contact with Flashcut CNC.. the make a direct retrofit for our tables.. I'm researching the cost and feasibility right now... You might call them..
User avatar
Limitless
1.5 Star Member
1.5 Star Member
Posts: 30
Joined: Wed Aug 27, 2014 12:30 pm
Location: Jogues, Ontario, Canada
Contact:

Re: Torchmate Blue Screen Torch Height Control

Post by Limitless »

Alright...Thanks! I will try to find something that will work with it besides the upgrade of Torchmate which is almost the price of a new table.
tac1fab
1/2 Star Member
1/2 Star Member
Posts: 7
Joined: Fri Nov 01, 2019 2:58 pm

Re: Torchmate Blue Screen Torch Height Control

Post by tac1fab »

C&CNC solution seems to have more value.. I'm doing the research now.
6 cylinder puller
1 Star Member
1 Star Member
Posts: 20
Joined: Sun May 24, 2020 10:13 pm

Re: Torchmate Blue Screen Torch Height Control

Post by 6 cylinder puller »

Anyone find anything out ?
Post Reply

Return to “Torchmate Forum”