ISO ADVICE on a Tables

Torchmate Hardware discussion forum
Post Reply
Glstiles
1 Star Member
1 Star Member
Posts: 18
Joined: Wed Jul 14, 2021 2:21 pm

ISO ADVICE on a Tables

Post by Glstiles »

NEED ADVICE!

Have the opportunity to buy an older Torchmate table (before Lincoln took over) that is a Flashcut 501A control. Anything I should know about this model? It’s a 4x8 and it’s in great condition, welded base which is very sturdy, and comes with a Hypertherm 65. I just dont know much about their older tables and am concerned about 1. sturdiness 2. longevity since its 10 years old and 3. how/if Torchmate is willing to sercive or replace parts.

ANY AND ALL ADVICE IS GREAT!!!!
weldguy
4 Star Elite Contributing Member
4 Star Elite Contributing Member
Posts: 1929
Joined: Fri Apr 17, 2009 11:48 am

Re: ISO ADVICE on a Tables

Post by weldguy »

They are not the nest built table but do work and if the price is right than thats a big bonus. I doubt Lincoln would be of much help to you but you can call them to confirm that but if your mechanically inclined you should be able to overcome most issues on any table.
Post Reply

Return to “Torchmate Forum”