Looking for aftermarket Coupling for Screw to Motor for my lifter

Torchmate Hardware discussion forum
Post Reply
tulsajosh
1.5 Star Member
1.5 Star Member
Posts: 42
Joined: Sat May 04, 2019 9:30 pm
Contact:

Looking for aftermarket Coupling for Screw to Motor for my lifter

Post by tulsajosh »

Looking for a after market or Original MFG part number/purchase to the Torchmate Gen 1-Gen 2 Smart motor lifter statation ball screw coupling. Im sure it's on McMasters site but not sure which one im looking for
adbuch
6 Star Elite Contributing Member
6 Star Elite Contributing Member
Posts: 8599
Joined: Thu Sep 21, 2017 5:22 pm
Location: Tucson, Arizona
Contact:

Re: Looking for aftermarket Coupling for Screw to Motor for my lifter

Post by adbuch »

Does it look like any of these?
David

https://www.mcmaster.com/ball-screw-actuators/
ball screw parts.jpg

You currently do not have access to download this file.
To gain download access for DXF, SVG & other files Click Here

tulsajosh
1.5 Star Member
1.5 Star Member
Posts: 42
Joined: Sat May 04, 2019 9:30 pm
Contact:

Re: Looking for aftermarket Coupling for Screw to Motor for my lifter

Post by tulsajosh »

no, it looks like this but way over prices from lincoln https://www.torchmatestore.com/Screw-Co ... _3195.html
weldguy
4 Star Elite Contributing Member
4 Star Elite Contributing Member
Posts: 1929
Joined: Fri Apr 17, 2009 11:48 am

Re: Looking for aftermarket Coupling for Screw to Motor for my lifter

Post by weldguy »

If that's all you need I suspect if the ID is correct for your shafts and the OD is not too large you could use almost any shaft coupling.
adbuch
6 Star Elite Contributing Member
6 Star Elite Contributing Member
Posts: 8599
Joined: Thu Sep 21, 2017 5:22 pm
Location: Tucson, Arizona
Contact:

Re: Looking for aftermarket Coupling for Screw to Motor for my lifter

Post by adbuch »

tulsajosh wrote: Thu Mar 24, 2022 11:57 am no, it looks like this but way over prices from lincoln https://www.torchmatestore.com/Screw-Co ... _3195.html
What size is your shaft that fits into the coupling? Shaft outside diameter? I have several sources for these at very inexpensive prices.
David
tulsajosh
1.5 Star Member
1.5 Star Member
Posts: 42
Joined: Sat May 04, 2019 9:30 pm
Contact:

Re: Looking for aftermarket Coupling for Screw to Motor for my lifter

Post by tulsajosh »

I think i got it solved, Just ordered one with smaller diameter and drilled out to the size needed but there was 2 different odd ball sizes and seems to be working just fine now. Thank you everyone
weldguy
4 Star Elite Contributing Member
4 Star Elite Contributing Member
Posts: 1929
Joined: Fri Apr 17, 2009 11:48 am

Re: Looking for aftermarket Coupling for Screw to Motor for my lifter

Post by weldguy »

:Like :Like
Post Reply

Return to “Torchmate Forum”