Flash Cut CNC Info Needed

Don't see your table manufacturer listed above? Post here in this forum.
Post Reply
User avatar
Robert1999
1.5 Star Elite Contributing Member
1.5 Star Elite Contributing Member
Posts: 27
Joined: Wed Oct 17, 2018 7:39 pm
Location: Belleville, Ontario

Flash Cut CNC Info Needed

Post by Robert1999 »

Hi, I'm wondering if anyone is familiar with flash cut and adding an air scribe to the system.

Thanks In Advance.
5x10 FabCut CNC Plasma with a Powermax 85
Many welders MIG, TIG, Stick
lathes and mills
And Many More Toys.

Started as a hobby and nows a career.
jimcolt
5 Star Elite Contributing Member
5 Star Elite Contributing Member
Posts: 3087
Joined: Mon Jul 20, 2009 11:18 pm
Location: North Carolina

Re: Flash Cut CNC Info Needed

Post by jimcolt »

Contact www.flashcutcnc.com for the best info. Great company! Jim Colt
Rdwfab
1/2 Star Member
1/2 Star Member
Posts: 7
Joined: Mon Feb 05, 2018 12:56 am

Re: Flash Cut CNC Info Needed

Post by Rdwfab »

I would also be interested in this. I contacted them months ago about adding an air scribe and no response. Please post back with what you find out!
Post Reply

Return to “Various Manufacturers Forum”