Plasma torch alternative

Thermal Dynamics plasma cutter discussion forum.
Post Reply
peterklos
1/2 Star Member
1/2 Star Member
Posts: 4
Joined: Sat Sep 20, 2014 7:51 pm

Plasma torch alternative

Post by peterklos »

Hi I have an old Thermal Dynamics PAK 45 after lots of tweaking it’s been working ok for years on our waterbed CNC. I need to replace the torch but can’t find an alternative , maybe Jim Colt from Hypertherm could suggest an alternative, I am not in a position to replace the main unit .
Any suggestions
Peter
bubbagsj
1 Star Member
1 Star Member
Posts: 16
Joined: Sat Jan 13, 2018 10:21 am

Re: Plasma torch alternative

Post by bubbagsj »

Jim Colt no longer works for Hypertherm.
HypHyDef
2.5 Star Member
2.5 Star Member
Posts: 126
Joined: Wed Jun 30, 2021 8:21 am

Re: Plasma torch alternative

Post by HypHyDef »

peterklos wrote: Tue Nov 16, 2021 3:12 am Hi I have an old Thermal Dynamics PAK 45 after lots of tweaking it’s been working ok for years on our waterbed CNC. I need to replace the torch but can’t find an alternative , maybe Jim Colt from Hypertherm could suggest an alternative, I am not in a position to replace the main unit .
Any suggestions
Peter
Hello Peter, I'm sorry to say that we do not offer any torches for competing systems. You would need to check with Thermal Dynamics to see if they offer a replacement for your system. Good luck! I hope you can keep it running.
Randy,
Marketing Data Specialist – Americas Region
Hypertherm Inc.
adbuch
6 Star Elite Contributing Member
6 Star Elite Contributing Member
Posts: 8598
Joined: Thu Sep 21, 2017 5:22 pm
Location: Tucson, Arizona
Contact:

Re: Plasma torch alternative

Post by adbuch »

peterklos wrote: Tue Nov 16, 2021 3:12 am Hi I have an old Thermal Dynamics PAK 45 after lots of tweaking it’s been working ok for years on our waterbed CNC. I need to replace the torch but can’t find an alternative , maybe Jim Colt from Hypertherm could suggest an alternative, I am not in a position to replace the main unit .
Any suggestions
Peter
Perhaps this will be of some help to you.
David

https://www.arc-zone.com/Thermal-Dynamics-PCH-M-6B
pak 45 torches and parts.jpg

You currently do not have access to download this file.
To gain download access for DXF, SVG & other files Click Here

Post Reply

Return to “Thermal Dynamics / Esab Plasma Cutters”