-
-
Weekly Free DXF Design
-
Download DXF/SVG
Painting Engravings
-
Trae Reed
- 1 Star Member
- Posts: 12
- Joined: Tue Nov 27, 2018 8:00 pm
Painting Engravings
What is everyone doing to paint engravings? I just started engraving and want to see what others are doing to make things pop. Thanks, Trae
-
tnbndr
- 4.5 Star Elite Contributing Member
- Posts: 1716
- Joined: Mon Jan 09, 2012 4:30 pm
- Location: New Berlin, WI
- Contact:
Re: Painting Engravings
I typically paint over the piece, let the paint dry and then grind off all the paint leaving just paint in the deep engraving.
I also use machinists dye, but typically only come in red and blue.
I also use machinists dye, but typically only come in red and blue.
Dennis
ComMarker B6 Galvo MOPA Fiber Laser
Hypertherm PM30 Hand Torch
RolAir 3HP Single Stage 30 Gal
13.8scfm@100psi, 3450RPM
Miller 215 MultiMatic
RW 390E Slip Roll (Powered)
AutoCAD, SheetCAM, Mach 3, Lightburn
ComMarker B6 Galvo MOPA Fiber Laser
Hypertherm PM30 Hand Torch
RolAir 3HP Single Stage 30 Gal
13.8scfm@100psi, 3450RPM
Miller 215 MultiMatic
RW 390E Slip Roll (Powered)
AutoCAD, SheetCAM, Mach 3, Lightburn
-
Trae Reed
- 1 Star Member
- Posts: 12
- Joined: Tue Nov 27, 2018 8:00 pm
Re: Painting Engravings
That's what I did and it turned out awesome, Thank you for the help!!
