Airbrush setup recommendation

Learn and share top coat finishing techniques, experiences, and product knowledge here. Paint, anodize, rubber coating, etc.
Post Reply
topkote
2 Star Member
2 Star Member
Posts: 58
Joined: Mon Dec 07, 2009 10:42 am

Airbrush setup recommendation

Post by topkote »

Anyone have a recommendation on an airbrush setup?

Thanks,

Mike
adbuch
6 Star Elite Contributing Member
6 Star Elite Contributing Member
Posts: 8598
Joined: Thu Sep 21, 2017 5:22 pm
Location: Tucson, Arizona
Contact:

Re: Airbrush setup recommendation

Post by adbuch »

Mike - I think this will depend on the particular airbrush and the paint/reducer being used. Or are you asking for recommendations as to which airbrush to purchase?
David
topkote
2 Star Member
2 Star Member
Posts: 58
Joined: Mon Dec 07, 2009 10:42 am

Re: Airbrush setup recommendation

Post by topkote »

I will likely be using the Steel FX powders. I am wondering what one should get for an airbrush and compressor.

Thanks
AREA
3 Star Member
3 Star Member
Posts: 267
Joined: Thu Jul 19, 2012 3:36 am

Re: Airbrush setup recommendation

Post by AREA »

I am not sure it really matters much what airbrush you use. If you were trying to airbrush and mural or something it would be a different story but your essentially just spraying your dyes at your metal part, no real intricacy is involved here. I wouldn't worry much about the type and wouldn't spend much on it either for this appliciation.
Carypipes
1/2 Star Member
1/2 Star Member
Posts: 7
Joined: Mon Feb 22, 2021 7:01 pm

Re: Airbrush setup recommendation

Post by Carypipes »

ive used iwata air brushes for years.
Post Reply

Return to “Paint & Other Top Coats”