Where to find DRAG TIPS for Harbor Freight Titanium 45A Plasma Cutter

[ecarver2]

Hello,

I have searched high and low to find a drag tip to use with my Harbor Freight Titanium 45A (#56255) plasma cutter. I would greatly appreciate it if anyone can share a product with me.

Here's the plasma cutter I have --> https://www.harborfreight.com/45a-plasm ... 56255.html

Thanks in advance!

[cuttinparts]

Harbor Freight has the consumables, don't a drag specific tip but that's what the standoff is for show on the end of the torch.

[ecarver2]

Harbor Freight has the consumables, don't a drag specific tip but that's what the standoff is for show on the end of the torch.

Thanks for your reply. Yeah, I'm aware of their consumables—unfortunately, no drag tips. I want a drag tip because I don't like using the standoff.

[djreiswig]

Not sure about the Titanium, but the older models had a Trifimate (sp) torch. Maybe you can get drag consumables for one of those.

[ecarver2]

Anybody have a link for where I can buy?

[acourtjester]

this may help if it is a Trifiate torch.
https://shop.trafimet.com/en/contact.html
https://shop.trafimet.com/en/products/PLASMA/
https://www.weldingstop.com/For-Trafimet-c1456.html

[ecarver2]

this may help if it is a Trifiate torch.
https://shop.trafimet.com/en/contact.html
https://shop.trafimet.com/en/products/PLASMA/
https://www.weldingstop.com/For-Trafimet-c1456.html

Thank you!

[TJS]

Those look to be the same torch as HTP. I get my consumables for my HTP plasma cutter actually at Harbor Freight. You can also try HTP site. USAweld dot com.

[acourtjester]

good old Google

hound.JPG

[mechanic416]

The best thing to do if you have a Titanium plasma cutter is change the torch out to a PT/IPT 60 torch then you can get all kinds of consumables for it.

IPT60 ABC.jpg