Looking for help on pricing

Learn & share techniques, strategies, and experiences on marketing your plasma cut products in this forum.
Post Reply
cutnweld
3 Star Elite Contributing Member
3 Star Elite Contributing Member
Posts: 279
Joined: Mon Oct 14, 2019 1:47 pm

Looking for help on pricing

Post by cutnweld »

I'm wondering what you all would charge for something like this. 36" square with 16" high side, 1/4" X1-1/2" flatbar arond top for stability. 10 ga material. I'm in Canada but I usually assume the prices i see are USD. I hate pricing and wish it were easy :wink:
I cant tell you if cats and hockey mix but hey I do what i am told!

You currently do not have access to download this file.
To gain download access for DXF, SVG & other files Click Here

5X10 Shop built table
20x80x32 inch gap lathe
10x40 lathe
10x54 milling machine
2-Miller 255
Miller XMT350MPA
Lincoln squarewave tig 255
12 Ft Durma Brake
adbuch
6 Star Elite Contributing Member
6 Star Elite Contributing Member
Posts: 8602
Joined: Thu Sep 21, 2017 5:22 pm
Location: Tucson, Arizona
Contact:

Re: Looking for help on pricing

Post by adbuch »

I would probably charge between $350 and $450 depending on the cost to finish (spray or powder coat).
David
DieselFumes
3.5 Star Member
3.5 Star Member
Posts: 528
Joined: Thu Dec 05, 2019 11:33 am

Re: Looking for help on pricing

Post by DieselFumes »

I'd be in the same ballpark as David.
cutnweld
3 Star Elite Contributing Member
3 Star Elite Contributing Member
Posts: 279
Joined: Mon Oct 14, 2019 1:47 pm

Re: Looking for help on pricing

Post by cutnweld »

Thanks! I was thinking 350 but wasn't sure if that was on the high side. Thanks for your time.
5X10 Shop built table
20x80x32 inch gap lathe
10x40 lathe
10x54 milling machine
2-Miller 255
Miller XMT350MPA
Lincoln squarewave tig 255
12 Ft Durma Brake
Post Reply

Return to “Pricing, Advertising, & Marketing Your Products Forum”