Arclight table control box

Arclight Hardware discussion forum.
Post Reply
Triarc-Reid
1/2 Star Member
1/2 Star Member
Posts: 4
Joined: Mon Mar 19, 2018 12:10 pm

Arclight table control box

Post by Triarc-Reid »

Hello,

I'm looking at selling the motor control box from my 2015 5x10 table and was curious as to what it would be worth? On has around 5 hrs of cut time on it.
motoguy
4 Star Elite Contributing Member
4 Star Elite Contributing Member
Posts: 1184
Joined: Tue Aug 25, 2015 12:05 pm
Location: Central MO, USA

Re: Arclight table control box

Post by motoguy »

Is it Mach3 (Windows) or CommandCNC (Linux)? Motor (white) control box only, or does it include the motors? Include PWM/HUB as well?
Bulltear 6x12 w/ Proton Z axis & watertable
CommandCNC/Linux w/ Ohmic & HyT options
Hypertherm Powermax 85 w/ machine torch
Solidworks, Coreldraw X7, Inkscape, Sheetcam
Triarc-Reid
1/2 Star Member
1/2 Star Member
Posts: 4
Joined: Mon Mar 19, 2018 12:10 pm

Re: Arclight table control box

Post by Triarc-Reid »

motoguy wrote: Mon Mar 04, 2019 10:21 pm Is it Mach3 (Windows) or CommandCNC (Linux)? Motor (white) control box only, or does it include the motors? Include PWM/HUB as well?
Its Mach3.
Only Motor control box and RS485 Hub.
Post Reply

Return to “Arclight Dynamics”