Simple conversion needed. Will pay for doing it.

If you are looking for help with a file conversion please post it here rather than in the file sharing forums.
Post Reply
topkote
2 Star Member
2 Star Member
Posts: 58
Joined: Mon Dec 07, 2009 10:42 am

Simple conversion needed. Will pay for doing it.

Post by topkote »

Good morning Folks,
Its one of those days. I need someone to make me up the following CUT FILES FOR the following house Letters with Numbers.

I need 2 Letter C as in Casey letters in the Bold Time New Roaman Font that are approximately 24".
One needs the number 96 the other 354

The Third Letter needs to be G as in George. Same Bold Timers New Roman Font Approximately 24".
This letter G need the number 380 .

I have attached a copy of what I'd like. Notice that the G 380 needs to be better aligned.

Let me know how much you want to do them. I am too frustrated to work on them any more today and need to get them done for my friend.

Thanks Mike
Letter_C_with_354_Letters_SVG.svg-text37166-239.png
Letter G with 380 Letters SVG.svg
Letter C with 96 Letters SVG.svg

You currently do not have access to download this file.
To gain download access for DXF, SVG & other files Click Here

Last edited by topkote on Wed Mar 23, 2022 12:03 pm, edited 1 time in total.
TJS
3.5 Star Elite Contributing Member
3.5 Star Elite Contributing Member
Posts: 707
Joined: Wed Nov 26, 2014 1:22 pm
Location: Fairfield, CT.
Contact:

Re: Simple conversion needed. Will pay for doing it.

Post by TJS »

Not sure what the ask is here. You have created the files it looks like already. Are you asking to have them cut out.
plasmanewbie
4.5 Star Elite Contributing Member
4.5 Star Elite Contributing Member
Posts: 2567
Joined: Thu Jul 24, 2008 11:15 am

Re: Simple conversion needed. Will pay for doing it.

Post by plasmanewbie »

I'm with TJS in guessing you need them cut. Where are you located? What thickness and type of material?
topkote
2 Star Member
2 Star Member
Posts: 58
Joined: Mon Dec 07, 2009 10:42 am

Re: Simple conversion needed. Will pay for doing it.

Post by topkote »

Sorry for the confusion. I just need the files converted to DXF so I can cut them out.
plasmanewbie
4.5 Star Elite Contributing Member
4.5 Star Elite Contributing Member
Posts: 2567
Joined: Thu Jul 24, 2008 11:15 am

Re: Simple conversion needed. Will pay for doing it.

Post by plasmanewbie »

Here are the C's, and the G hope it helps. May need some tweaks to get exactly what you need but it's close and in dxf format.
C96.dxf
C354.dxf
G380.dxf

You currently do not have access to download this file.
To gain download access for DXF, SVG & other files Click Here

TJS
3.5 Star Elite Contributing Member
3.5 Star Elite Contributing Member
Posts: 707
Joined: Wed Nov 26, 2014 1:22 pm
Location: Fairfield, CT.
Contact:

Re: Simple conversion needed. Will pay for doing it.

Post by TJS »

Topkote,
Are you using sheetcam. I use sheetcam/CommandCNC and all I used are SVGs. Created in Inkscape.
adbuch
6 Star Elite Contributing Member
6 Star Elite Contributing Member
Posts: 8602
Joined: Thu Sep 21, 2017 5:22 pm
Location: Tucson, Arizona
Contact:

Re: Simple conversion needed. Will pay for doing it.

Post by adbuch »

topkote wrote: Wed Mar 23, 2022 11:52 am Sorry for the confusion. I just need the files converted to DXF so I can cut them out.
You could simply open them with Inkscape and then save as dxf.
David
User avatar
Joe Jones
5 Star Elite Contributing Member
5 Star Elite Contributing Member
Posts: 3041
Joined: Sat Oct 11, 2014 2:33 pm
Location: Franklin, KY., USA
Contact:

Re: Simple conversion needed. Will pay for doing it.

Post by Joe Jones »

Unless you need to match existing signs, why not ass some flair to them?

Joe
C AND G ADDRESS 5 SIGNS.jpg
C AND G ADDRESS SIGNS.dxf
C AND G ADDRESS SIGNS 5.dxf
C AND G ADDRESS SIGNS 4.dxf
C AND G ADDRESS SIGNS 3.dxf
C AND G ADDRESS SIGNS 2.dxf

You currently do not have access to download this file.
To gain download access for DXF, SVG & other files Click Here

Franklin, KY., USA
Samson 510 & 4x4
6” Z Rail Lift Kit for PlasmaCam
CreatBot D600 PRO 3D Printer
12 Lasers
FREE DesignEdge Training!

It is more fun when it isn't necessary!
plasmanewbie
4.5 Star Elite Contributing Member
4.5 Star Elite Contributing Member
Posts: 2567
Joined: Thu Jul 24, 2008 11:15 am

Re: Simple conversion needed. Will pay for doing it.

Post by plasmanewbie »

Joe Jones wrote: Thu Mar 24, 2022 1:08 am Unless you need to match existing signs, why not ass some flair to them?
Joe
Hey Joe, you assed a lot of flair to those! :HaHa :HaHa :HaHa Seriously though, they look great :Like
User avatar
Joe Jones
5 Star Elite Contributing Member
5 Star Elite Contributing Member
Posts: 3041
Joined: Sat Oct 11, 2014 2:33 pm
Location: Franklin, KY., USA
Contact:

Re: Simple conversion needed. Will pay for doing it.

Post by Joe Jones »

I like the lower right design the best

Joe


.
Franklin, KY., USA
Samson 510 & 4x4
6” Z Rail Lift Kit for PlasmaCam
CreatBot D600 PRO 3D Printer
12 Lasers
FREE DesignEdge Training!

It is more fun when it isn't necessary!
Post Reply

Return to “File Conversion Help Wanted”