Duck Hunting Time
- trucks1948
- 3 Star Elite Contributing Member
- Posts: 439
- Joined: Sat Jun 13, 2009 10:00 am
- Location: Friendship,Wi
-
- 1/2 Star Member
- Posts: 1
- Joined: Fri Apr 03, 2009 3:43 am
Re: Duck Hunting Time
Love the flying ducks! Are you gonna share this dxf of these?
- trucks1948
- 3 Star Elite Contributing Member
- Posts: 439
- Joined: Sat Jun 13, 2009 10:00 am
- Location: Friendship,Wi
Re: Duck Hunting Time
I'll see if i can find it.Jim
- trucks1948
- 3 Star Elite Contributing Member
- Posts: 439
- Joined: Sat Jun 13, 2009 10:00 am
- Location: Friendship,Wi
-
- 3 Star Member
- Posts: 493
- Joined: Sun Sep 12, 2010 11:18 pm
- Location: AZ
Re: Duck Hunting Time
Nice file trucks1948. Here is one that I have just cut at about a 12x12 . need to do some work to the duck. This is not even close as good as yours is but I am a newbe at this If I can get it uploaded. Thanks. Rod in AZ.
Last edited by Eagle Mtn Metal Works on Sat Nov 06, 2010 12:09 pm, edited 3 times in total.
Rod S in AZ
- trucks1948
- 3 Star Elite Contributing Member
- Posts: 439
- Joined: Sat Jun 13, 2009 10:00 am
- Location: Friendship,Wi
Re: Duck Hunting Time
i can't do the pcm could someone make it dxf?Thanks Jim
- dreamer
- 2 Star Member
- Posts: 64
- Joined: Mon Mar 22, 2010 8:01 am
- Location: carlsbad NM.
Re: Duck Hunting Time
here you go............Harold
- Attachments
-
- seating duck.dxf
- (125.74 KiB) Downloaded 463 times
- BrianMick
- 4 Star Elite Contributing Member
- Posts: 992
- Joined: Sun Dec 06, 2009 8:00 am
- Location: St. Cloud,Minnesota United States of America
- Contact:
-
- 3 Star Member
- Posts: 493
- Joined: Sun Sep 12, 2010 11:18 pm
- Location: AZ
Re: Duck Hunting Time
Hey Jim I cut the main part of this file ( Duck in frame )and the lower part of the duck's bill will cut out ok if you don't cut it smaller then a 10 x10. I was doing some editing on Sunday on this file and by mastake I deleated the hole file and I tought that I had lost the hole file. I did not relise that the (Setting Ducks) file, that I posted had the Duck on the pond, in this file. I had to download it again so I could edit and finish the Duck on the pond part. Nice work on the Mallards.
Rod S in AZ
- Rem300wm
- 3 Star Elite Contributing Member
- Posts: 262
- Joined: Sat Feb 13, 2010 12:33 am
Re: Duck Hunting Time
Hello to all
trucks1948 Can You tell Me Where to get the Hunter and dog file ? I Like it very much and will like to cut it for a friend of mine.
Thanks for the help.
Rem
trucks1948 Can You tell Me Where to get the Hunter and dog file ? I Like it very much and will like to cut it for a friend of mine.
Thanks for the help.
Rem
- trucks1948
- 3 Star Elite Contributing Member
- Posts: 439
- Joined: Sat Jun 13, 2009 10:00 am
- Location: Friendship,Wi
Re: Duck Hunting Time
it should be on here if you do a search.If you can't find it PM me and ill see if i can.Jim
- Rem300wm
- 3 Star Elite Contributing Member
- Posts: 262
- Joined: Sat Feb 13, 2010 12:33 am
Re: Duck Hunting Time
Hello to all
Jim I have found the file .
Thank You for Your help.
Rem
Jim I have found the file .
Thank You for Your help.
Rem
-
- 1.5 Star Member
- Posts: 39
- Joined: Wed Aug 14, 2013 10:28 am
- Location: Spokane, WA
- Contact:
Re: Duck Hunting Time
Gotta say thanks for the Ducks- That is the first file that I could literately one-click in PlasmaCAM, and it pathed every part of it. I had to scale it down a touch to fit on the metal I have on hand, but I'm heading out to cut it now. Wish me luck-