Its Almost time

[BrianMick]

Hey every one.....I am looking for a few snowman designs I only have 2 in my collection and neither is very good they are pretty plain.......I have 2 different customers that want some snowmen and Want some thing a little ... what is the word....
snazzier than these.....any help would be great I spent 2 hours just looking on google and didnt see any thing I liked....
Thanks Brian

snowman.jpg

Snowman3.jpg

[Larry83301]

If it's different looking snowmen that you are looking for try a Google image search for
calvin and hobbes snowmen
These are about as different as they get.

Larry

[Patrick Waite]

Here is one. For every one

snowman.1.dxf

[BrianMick]

pic

snowman_1_dxf.jpg

Thanks patrick, I'll run it past her......cross your fingers.....I just don't know what you can do with a snowman?
Plus she is one of those customers.......yeah you know the type.....I wish I could read minds......I wouldn't have to put hours and hours into designs .....only to have the whole thing rejected......women are the hardest customers to please.......Sorry Parrotlady by the way hows your machine and new shop working....

[parrotlady]

Bah ha! No offense, I agree that woman are hard to please, and many are not great drivers... especially in the snow. We have a freak snowfall here, and after dropping my kids off at school, I saw countless minivans pulled over in panic.. ugh!

Shop WAS up and running... Then my compressor froze along with water in the lines of the tubing. LAME! I put the compressor in an insulated shed about 20 feet away from the shop (so I didnt have to listen to it) and just ran some hose from it to the plasma cutter in the shop. Now I have/had evey intention of hard plumbing it in, but I thought this would work for now... WRONG! I put a nice shiney new sheet of 16g cold roll on the table, did a dry run (this is something quite big), marveled in the glory of the cut, then on THE VERY LAST cut, the torch took a left and cut straight through the whole thing! I almost cried which is rare for me! So then I tried a couple other things, and the torch wouldnt fire at all, so after much swearing, I shut it down. The next day I realized the compressor was frozen (gauges and all) and snow came out the end of the hose so I am hoping that that was the problem. Now I have to bring the compressor closer, build it a closet and hard plumb everything in. I am telling ya, these road blocks are aging me! Thanks for asking!

[BrianMick]

Well I hope things start going a little smoother.................On the brighter side .....Thank you Patrick...she loved what I did with your snowman.....haven't cut it yet....here is the pic, its a coat rack just bend the tabs and mittens up and its done .........due to recent events I will not post the dxf unless someone can tell me where the snowflakes came from
(I Think I got them from here out of a file called Christmasbunch.dxf) but I cant remember for sure The rest of the artwork is mine and yours....
Brian

[akpilot]

Thanks for the idea, my wife is big into snowmen!! here is my dxf I made my own snowflakes........I hope they don't look like anybody else s

I wish I could figure out how to convert the dxf into a jpg

[parrotlady]

Well I hope things start going a little smoother.................On the brighter side .....Thank you Patrick...she loved what I did with your snowman.....haven't cut it yet....here is the pic, its a coat rack just bend the tabs and mittens up and its done .........due to recent events I will not post the dxf unless someone can tell me where the snowflakes came from
(I Think I got them from here out of a file called Christmasbunch.dxf) but I cant remember for sure The rest of the artwork is mine and yours....
Brian

ohhh I love that!!! Would it still be wrong if you privately sent it to me??

[BrianMick]

Thanks for the idea, my wife is big into snowmen!! here is my dxf I made my own snowflakes........I hope they don't look like anybody else s

I wish I could figure out how to convert the dxf into a jpg

I use a free dwg dxf coverter and open the pic save it and then open with a paint program to fill the colors so you can tell if it is cut ready...
Brian