Sending out a call for help.

erichsmith · Post by **erichsmith** » Fri Nov 26, 2010 3:53 pm

Guy's I know that you all come through when someone needs something. I am not one to really ever ask for help but I am getting down to the wire. The waterjet that I use has been down for a month. I do a lot of volunteer work for the local community theater group and one of the things I do is I make a custom cut item for every production they put on. Well, there is a show opening one week from today and I still have not been able to cut the show sign. I have the DXF file ready to cut but I am not sure the waterjet will be up and running before Friday. Is there anyone willing to cut this for me at a reasonable cost? It's not large and it's not too intricate but I would need it shipped to me no later than Thursday. If there is anyone at all who thinks they can help please let me know. Plasma cut is fine I don't need a waterjet cut.

Post by **Larry83301** » Fri Nov 26, 2010 4:00 pm

Try this place, seems to be reasonable.

http://www.metalartbydesign.com/

Larry

Post by **oldsoulmetal** » Fri Nov 26, 2010 8:19 pm

Im willing but shipping oregon to north carolina? how big? would it make it there in time?

erichsmith · Post by **erichsmith** » Fri Nov 26, 2010 10:40 pm

Oldsoulmetal,

I really don't care about shipping or the cost I just need it done. I made a commitment this year to do all the shows and I plan on following through with it. Send me a PM with what you would charge. I am attaching a DXF of what I need done.

Post by **AZWOODMAN** » Fri Nov 26, 2010 11:10 pm

Does this have to be cut on a waterjet...I only have Plasma but will be willing to cut it out for free and ship it to you from AZ if you need help...Let me know

Post by **azfabshop** » Sat Nov 27, 2010 12:25 am

The file size when I downloaded it is 12.5x8.3 is that correct and what thickness did you need it in? I also could plasma cut if for free if u pay shipping but I am also in az. I will be on shift til Mon. morn though

Post by **oldsoulmetal** » Sat Nov 27, 2010 3:32 am

well looks like you got your answer for help. azfabshop might be closer youd get it probally a day earlier. just let one of us know. I'm getting ready for a christmas bazaar so the metal i have is 14 and 16ga. I could slip it in to one of the runs.
If need be. wouldnt be till monday before id be able to ship either.
Good luck.
David

AIRFLOWKID · Post by **AIRFLOWKID** » Sat Nov 27, 2010 9:29 am

Eric,
I would be glad to help you out . I'm in Pittsburgh Pa. Let me know specs.

Tim Red Robin Creatives

Post by **coupebuilder** » Sun Nov 28, 2010 11:58 am

We are in NY if you are still looking for help, If it is only 12.5" x 8" or so I probably have enough .060 scrap (oh wait....now they are "pre-cuts" for the local guys who always mooch off me lol) to make several. Happy to burn it for free if you pay the ups, we can probably ship it tomorrow.

Post by **MetalMastersInc** » Wed Dec 01, 2010 6:41 pm

Eric,

Shoot me a message if you still need this. I just saw the post so I don't know if you already have something lined up. I can have it cut for you tomorrow and I'm about 2 hrs south of you in dunn (2hrs, depending on the traffic on I-40 LOL!) I can probally even have it powdercoated for you by tomorrow afternoon as well, if you need it.

Zack

Post by **MetalMastersInc** » Wed Dec 01, 2010 6:45 pm

Oh and btw, you are one lucky SOB to have a water jet.

Zack
MetalMastersNC.com

Post by **oldsoulmetal** » Wed Dec 01, 2010 11:59 pm

guys i sent out the piece on monday. he should have it tommorrow. unless he needs another cutting lol

Sending out a call for help.

Sending out a call for help.

Re: Sending out a call for help.

Re: Sending out a call for help.

Re: Sending out a call for help.

Re: Sending out a call for help.

Re: Sending out a call for help.

Re: Sending out a call for help.

Re: Sending out a call for help.

Re: Sending out a call for help.

Re: Sending out a call for help.

Re: Sending out a call for help.

Re: Sending out a call for help.