Steel Moving Equipment
-
- 2 Star Member
- Posts: 51
- Joined: Thu Aug 07, 2014 4:31 pm
Steel Moving Equipment
I am trying to find some plans for a lift or some piece of equipment that I can move my steel from the stack to the table. I am needing some type of device or lift because my 17 year old will be gone in another year, and, as we all know, 4 X 8 sheets of steel are not easy to move. Any help with a lift design would be greatly appreciated. I don't know if I want to buy a forklift or make something to move the steel. Thanks
Boyd Fortin
Boyd Fortin
-
- 3 Star Member
- Posts: 307
- Joined: Fri Dec 21, 2012 5:21 pm
Re: Steel Moving Equipment
Get one of the magnets. You can find them on ebay. I bought 2 of the 1400 pounders and they are great. I use my skid loader but you can use a engine puller which is what most guys use.
- acourtjester
- 6 Star Elite Contributing Member
- Posts: 7843
- Joined: Sat Jun 02, 2012 6:04 pm
- Location: Pensacola, Fla
Re: Steel Moving Equipment
Check out what Sean P developed for moving thinner sheets. I think he had 2 post with different ideas here is one
http://www.plasmaspider.com/viewtopic.p ... ver#p90055
http://www.plasmaspider.com/viewtopic.p ... ver#p90055
DIY 4X4 Plasma/Router Table
Hypertherm PM65 Machine Torch
Drag Knife and Scribe
Miller Mig welder
13" metal lathe
Small Mill
Everlast PowerTig 255 EXT
Hypertherm PM65 Machine Torch
Drag Knife and Scribe
Miller Mig welder
13" metal lathe
Small Mill
Everlast PowerTig 255 EXT
- SeanP
- 4 Star Member
- Posts: 950
- Joined: Thu Aug 01, 2013 11:50 am
- Location: Co Kerry, Ireland
Re: Steel Moving Equipment
Yes that's one that acourtjester posted link to that I modified the sack truck, must say it works great, a 6mm 8 x 4 sheet would be about the limit, but I keep 1/2 sheets in 12mm for small parts, it will move those about fine too, one mod I did add was to add a strip of rubber on the wood cross piece for extra grip.
I keep thinking I might make some sort of trolley to do the same job as clipping the brackets onto the table.
https://www.youtube.com/watch?v=ubyRYxWP4dU
Here is the other contraption I came up with for getting full sheets off the truck onto the table, works great no problem at all with 12mm - 8x4 sheets.
I was also wondering about a fork lift or some sort of hoist, but went for the easiest cheapest option and it works just fine.
https://www.youtube.com/watch?v=hYwryq0O-q4
I keep thinking I might make some sort of trolley to do the same job as clipping the brackets onto the table.
https://www.youtube.com/watch?v=ubyRYxWP4dU
Here is the other contraption I came up with for getting full sheets off the truck onto the table, works great no problem at all with 12mm - 8x4 sheets.
I was also wondering about a fork lift or some sort of hoist, but went for the easiest cheapest option and it works just fine.
https://www.youtube.com/watch?v=hYwryq0O-q4
Powermax XP45
Home built table, Candcnc DTHC 2, Dragoncut 620-4
R-Tech 210 Tig, Jasic 250 mig
Sheetcam, Scanything, Coreldraw
Table build gallery
Home built table, Candcnc DTHC 2, Dragoncut 620-4
R-Tech 210 Tig, Jasic 250 mig
Sheetcam, Scanything, Coreldraw
Table build gallery
- SeanP
- 4 Star Member
- Posts: 950
- Joined: Thu Aug 01, 2013 11:50 am
- Location: Co Kerry, Ireland
Re: Steel Moving Equipment
I made up the rollers all on the table, 6mm washers with 12mm hole, cut the slots and holes as well.
You currently do not have access to download this file.
To gain download access for DXF, SVG & other files Click Here
Powermax XP45
Home built table, Candcnc DTHC 2, Dragoncut 620-4
R-Tech 210 Tig, Jasic 250 mig
Sheetcam, Scanything, Coreldraw
Table build gallery
Home built table, Candcnc DTHC 2, Dragoncut 620-4
R-Tech 210 Tig, Jasic 250 mig
Sheetcam, Scanything, Coreldraw
Table build gallery
-
- 2 Star Member
- Posts: 51
- Joined: Thu Aug 07, 2014 4:31 pm
Re: Steel Moving Equipment
Thanks for all of the good ideas. I will figure out the route I go and let everyone know. Thanks.
Boyd Fortin
Boyd Fortin
- _Ogre
- 3.5 Star Member
- Posts: 529
- Joined: Sun Sep 15, 2013 4:26 pm
- Location: Motown
Re: Steel Moving Equipment
hats off to seanp
necessity is the mother of invention
both ideas are ingenious
necessity is the mother of invention
both ideas are ingenious
bulltear 4x8 cnc plasma table, candcnc bladerunner w/dthc, hypertherm powermax 65, sheetcam, mach3
laser cross hair for hypertherm torch http://www.plasmaspider.com/viewtopic.php?f=6&t=12508
an ogre smiley how cool!
laser cross hair for hypertherm torch http://www.plasmaspider.com/viewtopic.php?f=6&t=12508
an ogre smiley how cool!
- SeanP
- 4 Star Member
- Posts: 950
- Joined: Thu Aug 01, 2013 11:50 am
- Location: Co Kerry, Ireland
Re: Steel Moving Equipment
Go on then,,,,here is another one for all you loggers
https://www.youtube.com/watch?v=zLMSbXQjvQ4
https://www.youtube.com/watch?v=zLMSbXQjvQ4
_Ogre wrote:hats off to seanp
necessity is the mother of invention
Powermax XP45
Home built table, Candcnc DTHC 2, Dragoncut 620-4
R-Tech 210 Tig, Jasic 250 mig
Sheetcam, Scanything, Coreldraw
Table build gallery
Home built table, Candcnc DTHC 2, Dragoncut 620-4
R-Tech 210 Tig, Jasic 250 mig
Sheetcam, Scanything, Coreldraw
Table build gallery
-
- 2.5 Star Elite Contributing Member
- Posts: 177
- Joined: Sun Jul 18, 2010 7:59 pm
Re: Steel Moving Equipment
Sweet rig for the saw SeanP. I'm going to have to build one of those. Thanks
-
- 4 Star Elite Contributing Member
- Posts: 1184
- Joined: Tue Aug 25, 2015 12:05 pm
- Location: Central MO, USA
Re: Steel Moving Equipment
I would love to see some ideas on moving sheet. I too am a single man outfit, in VERY tight quarters...
Bulltear 6x12 w/ Proton Z axis & watertable
CommandCNC/Linux w/ Ohmic & HyT options
Hypertherm Powermax 85 w/ machine torch
Solidworks, Coreldraw X7, Inkscape, Sheetcam
CommandCNC/Linux w/ Ohmic & HyT options
Hypertherm Powermax 85 w/ machine torch
Solidworks, Coreldraw X7, Inkscape, Sheetcam
- SeanP
- 4 Star Member
- Posts: 950
- Joined: Thu Aug 01, 2013 11:50 am
- Location: Co Kerry, Ireland
Re: Steel Moving Equipment
Old bandsaw blade for the springy bit is ideal.eggauto wrote:Sweet rig for the saw SeanP. I'm going to have to build one of those. Thanks
Powermax XP45
Home built table, Candcnc DTHC 2, Dragoncut 620-4
R-Tech 210 Tig, Jasic 250 mig
Sheetcam, Scanything, Coreldraw
Table build gallery
Home built table, Candcnc DTHC 2, Dragoncut 620-4
R-Tech 210 Tig, Jasic 250 mig
Sheetcam, Scanything, Coreldraw
Table build gallery
- tnbndr
- 4.5 Star Elite Contributing Member
- Posts: 1675
- Joined: Mon Jan 09, 2012 4:30 pm
- Location: New Berlin, WI
- Contact:
Re: Steel Moving Equipment
Dennis
LDR 4x8, Scribe, DTHCIV
Hypertherm PM45, Macair Dryer
DeVilbiss Air America 6.5HP, 80Gal., 175psi, Two Stage
16.9scfm@100psi, 16.0scfm@175psi
Miller 215 MultiMatic
RW 390E Slip Roll (Powered)
AutoCAD, SheetCAM, Mach 3
http://ikescreations.com
LDR 4x8, Scribe, DTHCIV
Hypertherm PM45, Macair Dryer
DeVilbiss Air America 6.5HP, 80Gal., 175psi, Two Stage
16.9scfm@100psi, 16.0scfm@175psi
Miller 215 MultiMatic
RW 390E Slip Roll (Powered)
AutoCAD, SheetCAM, Mach 3
http://ikescreations.com
-
- 2.5 Star Elite Contributing Member
- Posts: 177
- Joined: Sun Jul 18, 2010 7:59 pm
Re: Steel Moving Equipment
Thanks for the tip SeanP
- HammerDownJustin
- 3.5 Star Member
- Posts: 613
- Joined: Mon Mar 04, 2013 10:41 pm
- Location: Paradise,Tx
Re: Steel Moving Equipment
I have used a cherry picker..roll around gantry crane.. 4 people grabbing a corner of 3/8" plate and a prybar to center it. I gave in and bought a 40' long 3" i-beam about 2 months ago and it was the best choice I have made. I built a trolley and the beam is supported every 20'. On the trolley is a northern tool winch. I think I could run my table while on crutches now if needed.
You currently do not have access to download this file.
To gain download access for DXF, SVG & other files Click Here
Home built 5x10 table CandCNC electronics
Miller 251 Mig
And lots of other cool stuff...
Miller 251 Mig
And lots of other cool stuff...
- Larry83301
- 5 Star Elite Contributing Member
- Posts: 2643
- Joined: Tue Oct 27, 2009 6:36 pm
- Location: Twin Falls, Idaho
Re: Steel Moving Equipment
HammerDownJustin wrote: I think I could run my table while on crutches now if needed.
Well, let's hope you don't have to!
Larry
- HammerDownJustin
- 3.5 Star Member
- Posts: 613
- Joined: Mon Mar 04, 2013 10:41 pm
- Location: Paradise,Tx
Re: Steel Moving Equipment
Lol I hope not..but a year and a half ago had to have a emergency knee replacement.. It opened my eyes and made me plan for the worse just incase.Larry83301 wrote:HammerDownJustin wrote: I think I could run my table while on crutches now if needed.
Well, let's hope you don't have to!
Larry
Home built 5x10 table CandCNC electronics
Miller 251 Mig
And lots of other cool stuff...
Miller 251 Mig
And lots of other cool stuff...